Non-metallic mud box cover with 3/4 inch. knockouts, 4 inch. deep.

The steel ladder bracket is used in cable routing systems to support the 2x2 and 4x4 FiberRunner Systems by directly attaching to any 0.375 inch H x 1.5 inch L (9.5mm x 38.1mm), or 0.375 inch H x 2 inch L (9.5mm x 50.8mm) ladder rack rails. It does not require a threaded rod. The ladder bracket includes hardware for mounting channel to bracket.

The steel ladder bracket is used in cable routing systems to support the 12x4 FiberRunner System by directly attaching to any 0.375 inch H x 1.5 inch L (9.5mm x 38.1mm) ladder rack rails. It does not require a threaded rod. The ladder bracket includes hardware for mounting channel to bracket.

The FiberRunner QuikLock Adjustable Cabinet Bracket is used to support the 12x4 system from any new 0.5 inch threaded rod which is extended down directly from the ceiling, the grid, or a ladder rack system. It features two-position height adjustments to accommodate systems with or without a hinged cover. The adjustable cabinet bracket is secured to the threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to the channel.

The 3-sided vertical tee trumpet spillout fitting is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from a FiberRunner Vertical Tee or 2x2 FiberRunner Fitting.

The FiberRunner 12x4 Vertical Tee Fitting attaches to a 12x4 channel and/or fitting to create a 90 vertical drop from a horizontal run. A hinged door is included. The vertical tee fitting requires a coupler to attach a trumpet or 3-port spillout to a vertical exit. It accepts the optional snap-on cover in conjunction with the channel.

The FiberRunner QuikLock Adjustable Cabinet Bracket is used to support the 12x4 system from any new 0.5 inch threaded rod which is extended down directly from the ceiling, the grid, or a ladder rack system. It features two-position height adjustments to accommodate systems with or without a hinged cover. The adjustable cabinet bracket is secured to the threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to the channel.

The FiberRunner Center Support Bracket is used to support the 6x4 and 4x4 systems from below with a new threaded rod. The center support bracket is used for a 12mm threaded rod. The bracket is secured to the threaded rod with two nuts. It can also be secured directly to the top of the cabinet. The pre-assembled slide clamps enable fast assembly to the channel.

Used to fully enclose 4x4 channel in conjunction with the Spill-Over Junction FRSPJ2X2BL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Optional cover for the outside vertical 45 angle fitting FROV4524X4YL. Snap-on feature allows cover to be installed and removed with no tools required.

The Wyr-Grid Pathway protects cables between the main distribution area and the equipment distribution area. The optional side walls snap-on without extra hardware or tools. It measures 118.4 inches H x 12.5 inches L x 2.1 inches W (3007.7mm x 317.5mm x 53.34mm). The Wyr-Grid Pathway can be used with the splice connector or the intersection splice connector.

1/2-13 hex nut and lock washer for use in attaching trapeze brackets to threaded rod.