Category 6 cable shall exceed the ANSI/TIA-568.2-E Category 6component standards. The conductors shall be 23 AWG constructionwith FEP (CMP) or PE (CMR) insulation. The copper conductors shall betwisted in pairs, separated by a cross divider, and all four pairs shall becovered with an overall foil and a low smoke, flame-retardant (CMP) orflame-retardant (CMR) PVC jacket.

Category 6A 4-pair U/UTP copper cable shall meet or exceed the ANSI/TIA-568.2-D Category 6A and ODVA EtherNet/IP standards. The solid copper conductors shall be 23 AWG with HDPE insulation. The copper conductors shall be twisted in pairs and wrapped with a foam polypropylene tape. All pairs shall then be covered with a discontinuous foil shield and an industrially rated PVC jacket which shall be oil and sunlight resistant and flame retardant to CMX/CMR for industrial Ethernet applications.

Category 6 cable shall exceed the ANSI/TIA-568.2-E Category 6component standards. The conductors shall be 23 AWG constructionwith FEP (CMP) or PE (CMR) insulation. The copper conductors shall betwisted in pairs, separated by a cross divider, and all four pairs shall becovered with an overall foil and a low smoke, flame-retardant (CMP) orflame-retardant (CMR) PVC jacket.

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 4 ft (1.2 m), Blue, 10 PACK

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, Orange, 2000ft/610m reel

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, White, 2000ft/610m reel

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 16/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 18/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.