MODULE DRIVE 4-QUADRANT (REVERSING), Product Family: DCS800, Horsepower: 5 HP @ 230 VAC / 10 HP @ 460 VAC, Output Current: 23 A @ 240 VDC / 23 A @ 500 VDC, Voltage: 230 VAC/240 VDC & 460 VAC/500 VDC, UL TYPE OPEN (IP00), Mounting: Wall-mount, DDCS Communications Board, Drive-to-drive Communication Board, 3-Phase Input, Frame: D1, Product HxWxD: 14.6 in x 10.6 in x 7.9 in, Product Weight: 24 lbs

CABINET DRIVE ULTRA LOW HARMONIC, Product Family: ACS800, Horsepower: 550 HP, Output Current: 672 A, Voltage: 480 VAC, Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Mounting: Floor-mounted, Local or Remote Mounted LCD Display and Keypad, 3-Phase Input, 3-Phase Output, Frame: R8i, Product HxWxD: 91.1 in x 48.4 in x 25.4 in, Product Weight: 2090 lbs

GENERAL PURPOSE PACKAGED DRIVE W/ DISCONNECT SWITCH AND FUSES, Product Family: ACS550, Horsepower: 7.5 HP, Output Current: 11.9 A, Voltage: 480 VAC , Voltage Range: 380-480V, NEMA 1 / UL Type 1 (IP21), Mounting: Wall-mounted, Advanced Control Panel, Relay Output Extention, 115/230V Digital Input Interface, 3-Phase Input, 3-Phase Output, Frame: R1, Product HxWxD: 28.7 in x 7.8 in x 11.2 in, Product Weight: 33 lbs

WALL-MOUNTED DRIVE REGENERATIVE, Product Family: ACS800, Horsepower: 20 HP, Output Current: 29 A, Voltage: 480 VAC , Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Wall-mounted, Local or Remote Mounted LCD Display and Keypad, ProfiBus-DP Adapter, 3-Phase Input, 3-Phase Output, Frame: R5, Product HxWxD: 32.12 in x 10.43 in x 15.35 in, Product Weight: 144 lbs

Braking Chopper, Nominal AC Line Voltage 380-480V, Minimum 2.19 OHM, RMS Continuous Load Current 115 A

MACHINERY DRIVE, Product Family: ACS850, Horsepower: 40 HP, Output Current: 57 A, Voltage: 480 VAC, Voltage Range: 380-500V, UL TYPE OPEN (IP20), Mounting: Cabinet-mounted (Side-by-Side), Cabinet Mount Control Panel, 3-Phase Input, 3-Phase Output, Frame: D, Product HxWxD: 22.3 in x 8.7 in x 10.9 in, Product Weight: 51 lbs

The DeviceNet network uses a linear bus topology. Terminating resistors are required on each end of the trunk line. Drop lines as long as 6 meters (20 feet) each are permitted, allowing one or more nodes to be attached. DeviceNet allows branching structures only on drop lines.

MODULE DRIVE 4-QUADRANT (REVERSING), Product Family: DCS800, Horsepower: 125 HP @ 230 VAC / 300 HP @ 460 VAC, Output Current: 485 A @ 240 VDC / 489 A @ 500 VDC, Voltage: 230 VAC/240 VDC & 460 VAC/500 VDC, UL TYPE OPEN (IP00), Mounting: Wall-mount, ControlNet Adapter, Drive-to-drive Communication Board, 3-Phase Input, Frame: D3, Product HxWxD: 18.1 in x 10.6 in x 12.2 in, Product Weight: 55 lbs

WALL-MOUNTED DRIVE ULTRA LOW HARMONIC , Product Family: ACS800, Horsepower: 40 HP, Output Current: 55 A, Voltage: 480 VAC, Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Wall-mounted, Local or Remote Mounted LCD Display and Keypad, EtherNet Adapter, 3-Phase Input, 3-Phase Output, Frame: R5, Product HxWxD: 32.12 in x 10.43 in x 15.35 in, Product Weight: 144 lbs

MACHINERY DRIVE, Product Family: ACS850, Horsepower: 7.5 HP, Output Current: 13 A, Voltage: 480 VAC, Voltage Range: 380-500V, UL TYPE OPEN (IP20), Mounting: Cabinet-mounted (Side-by-Side or DIN Rail), No Control Unit Cover, 3-Phase Input, 3-Phase Output, Frame: B, Product HxWxD: 15 in x 4 in x 10.8 in, Product Weight: 11 lbs

WALL-MOUNTED DRIVE ULTRA LOW HARMONIC , Product Family: ACS800, Horsepower: 100 HP, Output Current: 132 A, Voltage: 480 VAC, Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Wall-mounted, Local or Remote Mounted LCD Display and Keypad, Progressive Cavity Pump (PCP) software, 3-Phase Input, 3-Phase Output, Frame: R6, Product HxWxD: 38.19 in x 11.81 in x 17.28 in, Product Weight: 221 lbs

PANEL DRIVE 2-QUADRANT (NON-REVERSING), Product Family: DCS800, Horsepower: 300 HP, Output Current: 480 A, Voltage: 460 VAC /500 VDC, UL TYPE OPEN (IP00), Mounting: Cabinet-mount, Circuit Breaker, Starter for Auxiliary Mortor Fan, 3-Phase Input, Frame: C-D4, Product HxWxD: 35.32 in x 23.58 in x 16.17 in, Product Weight: 260 lbs