Showing 9229-9240 of 16,775 results

ABB - Installation Products · ABB
1100-49
300 Series Stainless Steel (11 Gauge) Support Bracket For Padmounted Switchgear used on CS1656. One Base Bracket and 1 Support Bracket included. Support Bracket - 21.730 inch x 4.00 inch wide x 2.250 inch deep with Two 1.500 inch Slots on each end. Base Bracket - 21.500 inch x 16.00 inch deep.
Contact for Pricing

ABB - Installation Products · ABB
1000-846
10 Pin, Ganged Current Transformer for Elastimold Switchgear, Standalone, 1000:1 Single Ratio.
Contact for Pricing

ABB - Installation Products · ABB
1150-168
Stabilizing Support Plate, Stainless Steel, Width 9 inch, Length 19 inch, Thickness 3/16 inch. 9/16 inch wide Slot in each corner.
Contact for Pricing

Contact for Pricing

ABB - Installation Products · ABB
1000-774
Stainless Steel Junction Back Plate, 17.75 inch length X 15.625 inch wide
Contact for Pricing

ABB - Installation Products · ABB
1000-773
Junction Base Bracket, 304 (12 Gauge) Stainless Steel, 17.75 inch length X 15.625 inch wide x 1.765 inch deep x 0.146 inch thick. Six Holes 3.343 inch Diameter. Four Corner Slots 0.562 inch wide
Contact for Pricing

ABB - Installation Products · ABB
1000-607
Aluminum Elbow Restraint. 4.50 inch wide x 16.50 inch long x .25 inch thick. (3) Holes 3.375 inch Diameter.
Contact for Pricing

ABB - Installation Products · ABB
1000-600-PPS
Coned Control, Portable Power Supply. Current Carrying over 1000 volts
Contact for Pricing

ABB - Installation Products · ABB
1000-150
Stud for 200 Amp Well, Flanged with Hex, Material Chromium Copper, Tin Plated, Length 1-11/32 inch, Widest Diameter 41/64 inch. 9/16 inch Hex, Side A is 3/8-16 UNC-2A Thread, and Side B is 1/2-13 UNC-2A Thread.
Contact for Pricing

ABB - Installation Products · ABB
1000-1244
(1) Modular Frame and Interface Bus Connection Assembly, (1) MVI3, 15kV, 20KA, 600 Amp Bushing Interface and 1000:1 Current Sensor. (1) 12/24VDC Motor Assembly, (1) Three Phase Cam-Op Assembly (includes x3 650LKC Per Way), (3) Insulated Caps (160DRG), (1) 10-Pin 40-Foot Control Cable for Current Sensor Connection, (1) 12-Pin 40-Foot Control Cable for Motor Connection.
Contact for Pricing

ABB - Installation Products · ABB
1000-544
Protective Cap Sealing Washer for Molded Vacuum Interrupter Motor Cable Cap, carries current over 1000 volts
Contact for Pricing

ABB - Installation Products · ABB
7500-1-1
ATS Board, Pre Programmed, Current Carrying greater than 1000 volts
Contact for Pricing