Showing 8941-8952 of 16,775 results

ABB - Installation Products · ABB
1601-APC-1
Black Shipping / Protective Cap, Polyethlene, Widest Outside Diameter 3 inches, Narrowest Diameter 1.2 inch, Length 3.8 inch.
Contact for Pricing

ABB - Installation Products · ABB
WMBQ-1
Wall mounting bracket for MCLF 27kV, Steel, Length 36 inch, Width 6-3/4 inch. Includes Stainless Steel Hardware.
Contact for Pricing

ABB - Installation Products · ABB
VSGADCP-35
35kV, 600 Amp, Deadbreak, EPDM Peroxide Insulation GAD with Conductive Jacket and Painted Contact - Length 7.633 inch x 3 inch widest Diameter. Voltage and Corona Tested for 35kV. Includes Lubricant.
Contact for Pricing

ABB - Installation Products · ABB
STDCONNMODKIT
Connector Modular Kit - Standard - includes Insulating Plug, Jumper, Stud, Connecting Brackets, Stabilizing Plate, Voltage Test Cap, Hardware, Instruction Sheets
Contact for Pricing

ABB - Installation Products · ABB
R2T35J4-N0440
Ranger2 Termination for 35KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neutral and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 1250.
Contact for Pricing

ABB - Installation Products · ABB
PTD4W20SE30
Potential Transfers, Solid Dielectric, Submersible, 2400:120V
Contact for Pricing

ABB - Installation Products · ABB
PTD35W166SEKIT
Potential Transformer, 20750/19090-125/115 VAC, 35kv Class, Single Bushing, 750VA, 166:1 Ratio, Submersible, Dead-front, with 200 Amp Loadbreak Installed Into 200 Amp Bushing Well. Includes Terminal Lug and Elastimold Nameplate.
Contact for Pricing

ABB - Installation Products · ABB
PTD21D1500VA175SE
25kV Solid Dielectric Potential Transformer, 21.1kV Line to Line, Delta, 1500VA, 175:1 Turns Ratio
Contact for Pricing

ABB - Installation Products · ABB
PTD21D15K100SE-KIT
PT, 12000-120VAC, 1500VA, 2 Bushings. Potential Transformer, 12,000-120VAC, 21/12kv Class, Double Bushing, 1500VA, 100:1 Ratio, Submersible, Dead-Front, with Stud and 200 Amp Loadbreak Insert installed into PT 200 Amp Bushing Well. Carries Current.
Contact for Pricing

ABB - Installation Products · ABB
PCG-1
Power Cable Ground, (for In-Line Ground Connector) includes Silicone Lubricant, Black Neoprene Stem, Zinc Plated Stainless Steel Spring Clip, Braid and Connector Assembly and Sealing Compound. Installation Instructions. 31.50 inch, #10 AWG. Construction 48 x 8 x 36. Tinned Flat Copper Braid
Contact for Pricing

ABB - Installation Products · ABB
MVI3CONNTRANSKT32
600 Amp Jumpers for MVI/Transformer Application, 15kV/27kVv, 32 inch Center-to-Center Distance
Contact for Pricing

ABB - Installation Products · ABB
MVIEXC06PU
4 Conductor Control Cable Extension, Male/Female Plug for Molded Vacuum Interrupter. 6 Foot Long
Contact for Pricing