Drive isolation transformer, three-phase, 20 kVA, 230–230 Volts, copper windings.

Drive isolation transformer, three-phase, 460–230 Volts, aluminum windings.

Drive isolation transformer, three-phase, 175 kVA, 575–460 Volts, copper windings.

Drive Transformer, 660 kVA, 575V to 460V, copper windings.

Features:Wall Mounting Bracket (WB1C), Primary Amperage 62.5/31.3A, Secondary Amperage 125/62.5A, 220 DEG C Insulation System, Standard:UL, KVA Rating:15KVA, Primary Voltage:240/480V AC, Secondary Voltage:120/240V AC

Features:Wall Mounting Bracket, Primary Amperage 208/104A, Secondary Amperage 416/208A, Stainless Steel Material Available as Custom, 220 DEG C Insulation System, Standard:UL, KVA Rating:50KVA, Primary Voltage:240/480V AC, Secondary Voltage:120/240V AC

75 kVA K-Factor 13 Transformer

SolaHD, Ventilated Distribution Transformer, DOE 10 Cfr P431 - DOE 2016 Compliant, Ul Listed E25872, 75 KVA, Primary Voltage 480 V, Secondary Voltage 240 V, 60 HZ, 3 Phase, Number Of Taps 7, Temperature Rating 150 Degrees C, Connection Delta-Delta W/ Ct, Winding Aluminium, Enclosure Nema Type 1

ABB's Totally enclosed non-ventilated (TENV) transformers are a smart choice for applications where dry-type transformer benefits are desired but the standard enclosure openings are unacceptable because of adverse atmospheric conditions. TENV transformers are recommended where dust, dirt, or lint may be present or where transformers are subject to sprays or controlled wash-down conditions. They are UL Listed through 75kVA for indoor or protected outdoor applications. TENV transformers meet NEMA TP-1 efficiency.

ABB Low-Voltage General Purpose Dry-Type transformers are built to last more than 20 years and are UL Listed.  Our Type QL & QF transformers meet DOE 2016 efficiency standards and are UL Energy Verified as energy efficient. They are available with aluminum or copper windings and in all three temperature rise ratings. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise. Single-piece front/back is easily removable for installation and service. Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022.

ABB's Low-Noise Low-Voltage General Purpose Dry-Type transformers also come in variants that allow for lower than standard (NEMA ST-20) audible noise levels and are UL Listed.  Ideally suited for installations where a transformers inherent audible noise needs to be as low as possible. They are availabel with either a -3dB or -5dB levels of noise reduction. Our Type QL & QF low-noise transformers meet DOE 2016 efficiency standards and are UL Energy Verified as energy efficient. They are available with aluminum or copper windings and in all three temperature rise ratings. Core and coil assemblies are mounted on rubber isolation pads to reduce noise. Single-piece front/back is easily removable for installation and service.Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022.

ABB Low-Voltage General Purpose Dry-Type transformers are built to last more than 20 years and are UL Listed.  Our Type QL & QF transformers meet DOE 2016 efficiency standards and are UL Energy Verified as energy efficient. They are available with aluminum or copper windings and in all three temperature rise ratings. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise. Single-piece front/back is easily removable for installation and service. Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022.