The SolaHD EE85H45S is a 45 kVA, 60 Hz isolation transformer from the EE85 Series. It features a 240 Delta Volt primary winding and a 480Y/277 Volt secondary winding. This unit is equipped with 2, 2.5% Full Capacity Above Normal (FCAN) taps and 4, 2.5% Full Capacity Below Normal (FCBN) taps for voltage adjustment. The transformer has a primary current rating of 108 Amps and a secondary current rating of 54.2 Amps. Its physical dimensions are 28 inches (711 mm) in height, 23 inches (584 mm) in width, and 19 inches (483 mm) in depth, with an approximate ship weight of 392 lbs (178 kg). It is designed with Electrical Connection 2 type 12 and is compatible with a Type 3R weather shield, model WS-14. This transformer is suitable for industrial power distribution applications requiring voltage step-up or step-down with isolation.

Transformer Adapter Pad, Aluminum, Pad 6.750 Long X 3.0 Wide X .375 Inch Deep, that is bolted to the Adapter 1.5 inch x 3.0 inch x 1.375 inch. Pad has NEMA 6N Spacing - Two Rows of (3) .562 inch Diameter Holes 1.75 Center to Center. Pad Adapter Attachment end has (2) 1/2-13 UNC-2B Bores for (2) Stainless Steel 1/2-13 x 1.25 Full Threaded Bolts that are included along with (2) 1/2 inch Belleville Washers, Black Caps and Oxide Inhibiting Compound. Adapter also has a 1-14 UNS-2B Tap area on side between bolts. Includes the 1-14 Steel Jam Nut.

Aluminum Lay-In Transformer Connector, 500 - 1000 kcmil, Aluminum and Copper, Bolt size 1/2 inch, Five Conductors per side, 8.688 inch Cut Length. 10 Wire Holes, 10 Mount Holes. with Torque Screws (TS)

Potential Transformer, 20750/19090-125/115 VAC, 35kv Class, Single Bushing, 750VA, 166:1 Ratio, Submersible, Dead-front, with 200 Amp Loadbreak Installed Into 200 Amp Bushing Well. Includes Terminal Lug and Elastimold Nameplate.

25kV Solid Dielectric Potential Transformer, 21.1kV Line to Line, Delta, 1500VA, 175:1 Turns Ratio

Power Transformer Kit, 35kV, 200 Amps, LoadBreak, L-G., 1) PT: PTD35W15K175SE, 35kV, Wye, 1500vA, Primary Range: 20125-21875VAC Line-to-Ground, Ratio: 175:1. 2) Bushing Insert. 3) Nameplate. 4) Terminal Lug

Power Transformer Kit, Includes PT- PTD15W60SE, 15kv, 7000-7620 VAC Line-to-ground Primary Range, Bushing Insert- 1601A4, Nameplate- 6000-483, Terminal Lug- 650-346, Reference P/N- 1150-363-1

Drive transformer, three-phase, 7.5 kVA, 460V to 230V, aluminum windings.

Drive transformer, three-phase, 7.5 kVA, 480V to 240V, aluminum windings.

Drive transformer, three-phase, 7.5 kVA, 575V to 460V, aluminum windings.

Drive transformer, three-phase, 7.5 kVA, 575V to 575V, aluminum windings.

Drive isolation transformer, three-phase, 11 kVA, 575–575 Volts, aluminum windings.