The TX6 Cat 6 UTP copper cable is constructed of 23 AWG copper conductors with FEP/polyolefin (CMP) insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant, plenum-rated, white jacket.

Icon with data image, snaps in to jack modules and select faceplates. Package includes 100 blue icons (5 runners with 20 icons each)

The IndustrialNet M12 D-Code Category 5e Overmolded Cordset is male to RJ45 preterminated with straight connectors. It is constructed of stranded, twisted pair cable for STP installations. The cordset is 600 V rated. The TPU jacket makes it suitable for high-flex applications for increased reliability. The cordset is 10 meters and teal.

The IndustrialNet M8 A-Code Overmolded Cordset has a single preterminated female straight connector. It is wired according to the IEC 61076-2-101 standards. The cordset is constructed of 22 awg unshielded industrial grade PUR cable. The cordset has 3 pins, is 10 meters, and is Black.

The IndustrialNet M12 A-Code Overmolded Cordset is male to female preterminated with straight connectors. It is wired according to the IEC 61076-2-101 standards. The cordset is constructed of 22 awg unshielded industrial grade PUR cable. The cordset has 5 pins, is 10 meters, and is Black.

The in-line, connectorized fiber optic splitter is a small form factor passive device that fits in FPONE enclosures and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter includes one SC-APC input on one side and thirty-two SC-APC outputs on the opposite side.

The Opticom LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are aqua with zirconia split sleeves.

The air inlet duct directs cooling air from the cold aisle into the intake fans of switches. It fits in a 2 RU footprint and is designed for Cisco Nexus 7004 switch.

The 4-Post rack combines the stability of a cabinet with the accessibility of an open rack to deliver maximum flexibility. The 45 RU rack is 23 inches wide overall (with 19 inch standard EIA mount) and 41.5 inches deep, with adjustable mounting rails that have #12-24 EIA universal mounting hole spacing, and printed numbering. A range of cable managers and accessories work with the rack. The rack is UL listed for 2,500 pounds and is made of welded steel. The rack is white.

The Lock-In device secures patch cord connections to prevent unauthorized access or accidental removal. Recessed device is used when jacks mount slightly deeper from the surface. Extended hood protects locking mechanism. Includes 100 green devices and five removal tools.

The Lock-In device secures patch cord connections to prevent unauthorized access or accidental removal. Standard device is used when jacks mount flush with the surface. Extended hood protects locking mechanism. Includes 100 blue devices and five removal tools.

The Lock-In device secures patch cord connections to prevent unauthorized access or accidental removal. Recessed device is used when jacks mount slightly deeper from the surface. Extended hood protects locking mechanism. Includes 100 blue devices and five removal tools.