The PanZone Overhead Distribution Rack expands rack space above a rack or cabinet to maximize space in data centers and telecommunications rooms. The overhead rack can mount to most overhead racks or cable trays, or be suspended from the ceiling in numerous configurations. The distribution rack enables the deployment of zone areas for greater scalability and quicker server deployments. The overhead rack is 2RU, rated for 40 pounds, made of steel, and is black.

Net Access /FlexFusion D-Ring Cable Retainer, 2RU, 8 D-rings per kit.

The Finger Bracket Kit is designed to attach to rails on the 800mm wide 42 RU Net-Verse cabinets. It is black.

OM5 2f 1.6mm PC OFNR PushPull LC/PushPull LC Std Polarity Ult Perf 3f

OM5 2f 1.6mm PC OFNR PushPull LC/PushPull LC Std Polarity Ult Perf 44f

OM5, 12 Fiber Interconnect, Plenum, PanMPO Female to PanMPO Female, Method B, Ultra Insertion Loss - 49 Feet

OM5, 24 Fiber Trunk, Low Smoke Zero Halogen, PanMPO Female to PanMPO Female, HD Flex Transition, Method B, Ultra Insertion Loss - 20 Meters

OM5, 12 Fiber Trunk, Low Smoke Zero Halogen, PanMPO Female to PanMPO Female, HD Flex Transition, Method A, Ultra Insertion Loss - 27 Meters

The NetKey Cat 6A UTP RJ45 Punchdown Keystone Jack Module is designed to terminate 4-pair, 22 26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. Jacks are individually serialized for traceability and are compatible with keystone interfaces such as NetKey Faceplates, Modular Patch Panels, and Surface Mount Boxes. The jack module is red.

The Mini-Com Cat 6 Shielded RJ45 Spring-Shuttered TG Jack Module is designed to terminate shielded 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. The integrated spring-shuttered door keeps dust and debris out of unmated RJ45 jack modules. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates.

The HD Flex Fiber Enclosure is 1 RU and is configured with sliding front-access drawers to accept up to eighteen 4 port HD Flex cassettes or Fiber Adapter Panels for a maximum density of 144 fibers.

The Panduit Opticom Wall Mount Fiber Enclosure is designed to manage and organize fiber distribution when space is limited. The FWME2 features 2 FAP/cassette slots and can be used as an interconnect or cross-connect in any telecommunications room and can use any standard FAP or FMP series adapter panel. The FWME2 is compatible with most Panduit Mini-Com , ST, SC and Coax products. It features 2 FAP/cassette slots, is made with steel and comes in black. 10.1 H x 12.0"W x 2.3 D (259mm x 305mm x 59mm)