Showing 3241-3252 of 3,866 results

Panduit
KJS6X88TCBL
The keystone Cat 6A shielded RJ45 jack module is designed to terminate 4-pair, 22-24 AWG shielded twisted pair cable. Shielded jack modules use a forward motion termination method to optimize performance. The die-cast housing provides a robust design to protect against physical and electromagnetic damage. The jack module is silver with a black front.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Panduit
FSDRA02Y
The 2 fiber indoor distribution cable (G.657.A1) is OS2, Riser (OFNR) rated and features 900um buffered fibers.
Contact for Pricing
Minimum Qty: 3000
Multiplier: 1
*Contact for lower quantities*

Panduit
QPCUDB6XB05
QuickNet Switch Port Harness contructed of Category 6A 28 AWG, UTP, CM/LSZH copper cable with Modular Plugs on one end and pre-terminated Cassette with Blue Jack Modules on the other end, Blue, 5 ft.
Contact for Pricing

Panduit
QPCUDB6XB07
QuickNet Switch Port Harness contructed of Category 6A 28 AWG, UTP, CM/LSZH copper cable with Modular Plugs on one end and pre-terminated Cassette with Blue Jack Modules on the other end, Blue, 5 ft.
Contact for Pricing

Panduit
PSL-DCPLRE-IW-C
The Lock-In device secures patch cord connections to prevent unauthorized access or accidental removal. Recessed device is used when jacks mount slightly deeper from the surface. Extended hood protects locking mechanism. Includes 100 off white devices and five removal tools.
Contact for Pricing

Panduit
PURCA26X04BU-UG
The TX6A Cat 6A U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Blue jacket with two cables in an aluminum interlock armor with an overall flame retardant PVC (CMR) jacket. Packaged 1000 ft./305m on a reel.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Panduit
PURCA6X04BU-UG
The TX6A Cat 6A U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Blue jacket in an aluminum interlock armor with an overall flame retardant PVC (CMR) jacket. Packaged 1000 ft./305m on a reel.
Contact for Pricing
Minimum Qty: 2000
Multiplier: 2000
*Contact for lower quantities*

Panduit
FODRX96Y
The 96 fiber indoor distribution cable is OM3, Riser (OFNR) rated and features 900 m buffered fibers.
Contact for Pricing
Minimum Qty: 1640
Multiplier: 1
*Contact for lower quantities*

Panduit
PWBPF2X4BL
The Formed Tee Fitting provides the needed coverage for a 90 degree turn. The formed tee comes complete with a base liner,two brackets and two side liners in order to protect cables from any sharp edges. The tee fitting also comes with two mounting hole locations to be used with threaded rod. This formed tee is intended for a 4" wide basket with a 2" side wall.
Contact for Pricing

Panduit
CHES2AWY
The Mini-Com 50mm x 50mm Faceplate Adapter accepts two Mini-Com Modules. Adapter mounts to standard 50mm x 50mm openings or FCFPAW, has a sloped design to improve bend radius. The adapter includes a label pocket for easy identification and is arctic white.
Contact for Pricing
Minimum Qty: 10
Multiplier: 1
*Contact for lower quantities*

Panduit
PWBPF4X12BL
The Formed Tee Fitting provides the needed coverage for a 90 degree turn. The formed tee comes complete with a base liner,two brackets and two side liners in order to protect cables from any sharp edges. The tee fitting also comes with two mounting hole locations to be used with threaded rod. This formed tee is intended for a 4" wide basket with a 12" side wall.
Contact for Pricing

Panduit
PWBPF6X18EZ
The Formed Tee Fitting provides the needed coverage for a 90 degree turn. The formed tee comes complete with a base liner,two brackets and two side liners in order to protect cables from any sharp edges. The tee fitting also comes with two mounting hole locations to be used with threaded rod. This formed tee is intended for a 6" wide basket with a 18" side wall.
Contact for Pricing