ER-35KV is a sensing resistor accessory used on systems up to 35 kV (non-continuous duty). It is an accessory for SE-330, SE-330AU, and SE-330HV.

Motorized Potentiometer24VDC,10 turn,10k. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost

EL731-02-00 is an earth-leakage relay with a supply voltage ac of 120–240 and a supply voltage dc of 120–240. Communications is offered via Profibus®.

Connects the SE-601 relay to an ungrounded 24 Vdc bus.

AnalogAlarm Annunciator24V DCInclM3092 P. The M3000 is a compact 24 channel Analogue Alarm Annunciator. The M3000 is ideal for surveillance of temperature sensors, pressure sensors and any other kind of sensors providing a signal within the range of 0-20 mA, 0-10 VDC or 0-30 VDC. A linearly pre-scaling is done in order to convert the measured input voltage or current into the entity measured by the sensor (e.g. temperature or pressure). Once this conversion has taken place, all further references are made to the measured entity.

SE-325ST is a neutral-grounding resistor monitor with a supply voltage of 120 ac and a ground-fault trip level of 0.5–4.0 A.

NGR MON.,UNIV., ETHERNET SC FIBER & RJ45

RBR122G-115VUC

CR-M012DC2 PLUGGABLE INTERFACE REL.

CR-M012DC3L PLUGGABLE RELAY

CR-M230AC4L PLUGGABLE RELAY

CR-M024AC4L PLUGGABLE RELAY