Start Current Relay. Start Current Relay.

EL700 SERIES COMM ADAPTER, RS485. Communications Adapter. Optional network-interface and firmware-upgrade communications adapter. Field installs in EL731.

Potentiometer 5K BULK. Potentiometer, 5kOhm, 2W, Wirewound Linear.

EL731-23-00 is an earth-leakage relay with a supply voltage dc of 24 and offers communications via EtherNet-IP™.

EL731-14-00 is an earth-leakage relay with a supply voltage ac of 24 and a supply voltage dc of 48. Communications is offered via Modbus®TCP.

EL731-10-00 is an earth-leakage relay with a supply voltage ac of 24 and a supply voltage dc of 48.

EL731-12-00 is an earth-leakage relay with a supply voltage ac of 24 and a supply voltage dc of 48. Communications is offered via Profibus®.

EL731-22-00 is an earth-leakage relay with a supply voltage dc of 24 and offers communications via Profibus®.

EL731-24-00 is an earth-leakage relay with a supply voltage dc of 24 and offers communications via Modbus®TCP.

EL731-20-00 is an earth-leakage relay with a supply voltage dc of 24 and measures 1.9H X 3.8W X 5.0D.

Output Unit. B6000 generator protection system is designed for protection of parallel working AC generators. Besides reverse power and overload protection, this system also includes short circuit protection. Optionally, the system can be equipped with frequency detection. The relay can be provided with two extra overcurrent/time units which can be used for alarms and/or tripping of non-essential load. It is also possible to obtain normally energized or normally de-energinzed output relay functions for each of the output relays. Output unit.

Motorized Potentiometer 230-240V AC, 1k. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost