G2200 Current Relay. 24V DC 5A. The G-Line relays are mainly intended for use in land-based applications. The G-Line relays provides an efficient solution for applications where flexibility and cost of purchase are the main issues. Despite a low purchase price, G-Line relays provide high quality, proper measuring techniques and a vast number of programmable options. Safety, accuracy and repeatability are important features in any protection system. G-Line relays all have built-in measuring transformers, one for each phase measurement. Transformers provide the best possible isolation with near perfect linearity and thereby no loss of accuracy. Voltages and currents can be measured through resistors or optical couplers.

Reverse Power Unit. B6000 generator protection system is designed for protection of parallel working AC generators. Besides reverse power and overload protection, this system also includes short circuit protection. Optionally, the system can be equipped with frequency detection. The relay can be provided with two extra overcurrent/time units which can be used for alarms and/or tripping of non-essential load. It is also possible to obtain normally energized or normally de-energinzed output relay functions for each of the output relays. Reverse power unit.

Potentiometer. Potentiometer, 2kOhm, 2W, Wirewound Linear.

The EFCT series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.

EL731-11-00 is an earth-leakage relay with a supply voltage ac of 24 and a supply voltage dc of 48. Communications is offered via DeviceNet™.

G3000 Frequency Relay. 24V DC. The G-Line relays are mainly intended for use in land-based applications. The G-Line relays provides an efficient solution for applications where flexibility and cost of purchase are the main issues. Despite a low purchase price, G-Line relays provide high quality, proper measuring techniques and a vast number of programmable options. Safety, accuracy and repeatability are important features in any protection system. G-Line relays all have built-in measuring transformers, one for each phase measurement. Transformers provide the best possible isolation with near perfect linearity and thereby no loss of accuracy. Voltages and currents can be measured through resistors or optical couplers.

Motorized Potentiomtr 230 VAC 1k 1 TURN. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost

Pwr Ref Unit100-110VOutput0-1VDCforT4800. Power Reference Unit. 100-110V. Output 0-1V DC for T4800.

Motorized Potentiomtr 230 VAC 2k 1 TURN. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost

Master Time Controller. Master Time Controller.

Motorized Potentiomtr 230 VAC 5k 1 TURN. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost

Reverse Power Unit. Reverse Power Unit **UDGÅET**