FlexGen Generator Controller - Basic. Integrated generator controller. The C6200 provides load depending start and stop, automatic synchronization and active / reactive load sharing for one diesel generator (3 phase). The C6200 will also ensure that the generator is always operating at the nominal speed / frequency no matter the load. Advanced grid paralling and Power Factor function are provided as standard. Programmable inputs and outputs allows for easy integration with PLC control. The C6200 can be operated in either fully automatic mode, semi-automatic mode or in manual mode.

Shutdown Unit 24VDC Delay for SPA. The unit has inputs for over speed, low oil pressure and a user defined input which can be used to monitor e.g. high water temperature. The M0600 has an input to indicate that the engine is running and another input to indicate that the engine is in the process of being halted. An output relay will give a closing signal, which can be used to stop the engine via the fuel valve or the stop solonoid (if available). The M0600 will work as a stand-alone protection unit for DIN-rail mounting. Alternatively, when limited space is available, the M0600 can be mounted directly on the rear side of the M2000 Engine Controller.

For splitter applications. Both terminations must be present.

Connects the SE-601 relay to an ungrounded 24 Vdc bus.

The SE-CS30 series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.

The SE-CS10 series current transformers (CTs) are key components of the Littelfuse protection relay product line. Littelfuse SE-134C and SE-135 Ground-Fault Ground-Check Monitors are designed specifically for use with the SE-CS10 CTs. A Littelfuse SE-330 Neutral-Grounding-Resistor Monitor and a Littelfuse SE-701 Ground-Fault Monitor can also be equipped with the SE-CS10 series to achieve the desired ground-fault-trip settings. Littelfuse motor- and feeder-protection relays can also make use of the SE-CS10 series either to measure phase current or ground-fault current.

6 Way Transmitter. 24V DC.. The M1500 PT100 6 Way Transmitter includes six current transducers in one box for use with DIN60751 3-wire PT100 temperature sensors. The output signals from the M1500 are 4-20 mA current signals, which can be easily fed into e.g. an analogue alarm monitor such as the M3000 Analogue Alarm Monitor. Each sensor input of the M1500 can be configured for three different temperature ranges: 0-160 ºC, 0-300 ºC or 0-600 ºC.

Indicator Panel. 8 channels, 24V DC/AC. The M4600 provides flush mounted LED based indication with 6, 8 or 20 channels. Each channel can be used to indicate the state of one potential free contact. The indicator units are available with either negative or positive reference. An insert paper label provides the opportunity to print a description or instruction right next to the related channel LED. The indicator units are available for both DC of AC supply. Input signals can be +24 VDC, +48 VDC or +110 VDC.

The MPS-CTU-01-00 is a motor protection system with a supply voltage between 65–265 V ac and 80–275 V dc. This unit monitors voltage, current, and temperature with communication via RS/TIA-485.

UA1-110 UNDERVOLTAGE RELEASE

MS116/132 UVR, 400VAC

The two delayed NO relay outputs have an OFF-delay time of 0,5 second.