Showing 1153-1164 of 54,867 results

Fuse ATDR - Class CC - Time-Delay 600VAC 300VDC 25A Ferrule Amp-Trap 2000®
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

High Speed Fuse Amp-Trap® A70QS 700VAC 700VDC 600A Bolted Blade
Contact for Pricing

High Speed Fuse Amp-Trap® A70QS 700VAC 700VDC 250A Bolted Blade
Contact for Pricing

Mersen GPM-A panel mount fuse holders will accommodate 5mm x 20mm fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps screwdriver cap / right angle solder series.
Contact for Pricing

Mersen GPM-A panel mount fuse holders will accommodate 5mm x 20mm fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps finger grip cap / solder series.
Contact for Pricing

Mersen GPM-A panel mount fuse holders will accommodate 5mm x 20mm fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 6.3 Amps screwdriver cap / right angle solder series.
Contact for Pricing

Littelfuse POWR-PRO® LDC series Class L fuses represent another first in fuse protection. LDC series fuses are the first UL Listed 600 volts AC and DC Class L fuse. Since they may be used for both AC and DC, they eliminate the concern that AC only fuses may be inserted into DC circuits. While LDC series fuses’ UL Listed DC interrupting rating is more than adequate for most applications (50,000 amperes at a 16 millisecond time constant), tests in our high power testing laboratory have shown that this remarkable fuse is capable of performing at much longer time constants. This makes the fuse uniquely suited for such applications as crane rail circuits and mass transit systems. Contact the factory for application information for special needs such as this. For AC-only systems, consider the use of POWR-PRO® KLPC series fuses. They have a full ten seconds time-delay at 500% rated current, and have a wider range of ratings.
Contact for Pricing

The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing

Contact for Pricing

Super-Safeway® In-Line Industrial GFCI, Manual Reset, Flying Leads, 30A, 120V, 0.61m (2.0') Cord Length
Contact for Pricing

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*