All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Circuit Protection Devices And Accessories

Subcategories

    Automotive Fuse

    Blade Fuses

    Cartridge Fuses

    Ceramic Fuses

    Circuit Breakers

    Circuit Interruptor

    Current Limiter

    Diazed Or Bottle Fuses

    Electronic Fuse

    Fuse Block

    Fuse Clip

    Fuse Holder

    Fuse Parts Or Accessories

    Glass Body Fuses

    Grounding Devices Or Assemblies

    High Speed Fuse

    Lightning Protection Apparatus And Accessories

    Medium Voltage Fuse

    Midget Fuses

    Miniature Circuit Breakers

    Molded Case Circuit Breakers

    Plug Fuses

    Power Fuse

    Semiconductor Fuse

    Surge Arrestor

    Surge Suppressers

    Time Delay Fuses

    Transient Protection Materials

    Vacuum Interruptor

    Voltage Regulator

Showing 2725-2736 of 54,867 results

Mersen X212540 - DIN D Fuse-link gG Size DII 500VAC 500VDC 25A Color code Yellow
Mersen

X212540

DIIGG50V25


DIN D Fuse-link gG Size DII 500VAC 500VDC 25A Color code Yellow

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Mersen K200707 - DIN D Fuse-link gG Size DII 500VAC 500VDC 10A Color code Red
Mersen

K200707

DIIGG50V10


DIN D Fuse-link gG Size DII 500VAC 500VDC 10A Color code Red

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Mersen X216542 - The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. 500 Volts 500 amps gG NH4 series.
Mersen · Ferraz Shawmut

X216542

4086500032297


The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. 500 Volts 500 amps gG NH4 series.

Contact for Pricing

Mersen Y218107 - NH solid links have a standard design. The current carrying parts are made of silver plated copper. It's also possible to get nickel plated design on request. The synthetic parts for insulated tags are in accordance with VDE 0636/DIN 57635 NH1 series.
Mersen · Ferraz Shawmut

Y218107

4086500032716


NH solid links have a standard design. The current carrying parts are made of silver plated copper. It's also possible to get nickel plated design on request. The synthetic parts for insulated tags are in accordance with VDE 0636/DIN 57635 NH1 series.

Contact for Pricing

Minimum Qty: 5

Multiplier: 5

*Contact for lower quantities*

Mersen P213062 - The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. 400 Volts D01 locking screw cap (for industry only) .
Mersen · Ferraz Shawmut

P213062

4086500011483


The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. 400 Volts D01 locking screw cap (for industry only) .

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Mersen X216105 - The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. NH pulling handle with cuff .
Mersen · Ferraz Shawmut

X216105

4086500033096


The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. NH pulling handle with cuff .

Contact for Pricing

Mersen Y215554 - The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. 400 Volts 63 amps D02 3 pole Linozed fuse base .
Mersen · Ferraz Shawmut

Y215554

4086500054558


The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. 400 Volts 63 amps D02 3 pole Linozed fuse base .

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

Mersen H331000 - Fuse Holder Modulostar® Size 14x51 IEC 690VAC 690VDC 3-Pole+N With Visual Indicator Microswitch IP20
Mersen · Modulostar

H331000

CMS143NMI


Fuse Holder Modulostar® Size 14x51 IEC 690VAC 690VDC 3-Pole+N With Visual Indicator Microswitch IP20

Contact for Pricing

Mersen S229717 - DIN NH Standard fuse-link gG Size NH000 690VAC 250VDC 80A isolated tags Double indicator Body width 21mm
Mersen

S229717

NH000GG69V80-1


DIN NH Standard fuse-link gG Size NH000 690VAC 250VDC 80A isolated tags Double indicator Body width 21mm

Contact for Pricing

Minimum Qty: 3

Multiplier: 3

*Contact for lower quantities*

Mersen Q228450 - DIN NH Standard fuse-link gG Size NH000 690VAC 250VDC 40A live tags Double indicator Body width 21mm
Mersen

Q228450

NH000GG69V40


DIN NH Standard fuse-link gG Size NH000 690VAC 250VDC 40A live tags Double indicator Body width 21mm

Contact for Pricing

Minimum Qty: 3

Multiplier: 3

*Contact for lower quantities*

Mersen S211593 - NH plastic base Size NH2 1000VAC 1000VDC 400A 2-Pole Screw Connection Screw PP Type
Mersen

S211593

BB22PP


NH plastic base Size NH2 1000VAC 1000VDC 400A 2-Pole Screw Connection Screw PP Type

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

Mersen F218758 - NH plastic base Size NH00 1000VAC 1000VDC 160A 2-Pole DIN Rail Connection Screw EP Type
Mersen

F218758

BB002EPR


NH plastic base Size NH00 1000VAC 1000VDC 160A 2-Pole DIN Rail Connection Screw EP Type

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

Showing 2725-2736 of 54,867 results