All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Hardware And Supplies

Subcategories

    Cable Clamp And Staple

    Cable Clips

    Cable Splicing Kits

    Cable Tie Kit

    Cable Tie Mounts

    Cable Ties

    Connector Mounting Hardware

    Din Rail

    Electrical Cable Grip

    Electrical Hangers

    Electrical Insulators

    Electrical Receptacle Multipliers

    Handle tie

    Harness Board Nails

    Heat Shrinkable Tube

    Strain Reliefs

    Transformer Bushings

    Wallplates

    Wire And Cable Pulling Device

Showing 817-828 of 2,697 results

Panduit MLT10S-CP - The MLT10S-CP Pan-Steel 304 grade stainless steel cable tie speeds up installation with a patented, wide entry self-locking head that eases band threading and insertion. Unique locking ramp design and strengthening ribs allows the tie to lock into place at any length along the tie body with increased lock strength. Fully rounded edges ensure worker and bundle safety.
Panduit

MLT10S-CP


The MLT10S-CP Pan-Steel 304 grade stainless steel cable tie speeds up installation with a patented, wide entry self-locking head that eases band threading and insertion. Unique locking ramp design and strengthening ribs allows the tie to lock into place at any length along the tie body with increased lock strength. Fully rounded edges ensure worker and bundle safety.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

Panduit PLT2I-M55 - Pan-Ty locking tie, intermediate cross section, 8.0 (203mm) length, nylon 6.6, fluorescent green.
Panduit

PLT2I-M55


Pan-Ty locking tie, intermediate cross section, 8.0 (203mm) length, nylon 6.6, fluorescent green.

Contact for Pricing

Minimum Qty: 5000

Multiplier: 1000

*Contact for lower quantities*

Panduit PLT2S-M53 - Pan-Ty locking tie, standard cross section, 7.4 (188mm) length, nylon 6.6, fluorescent orange.
Panduit

PLT2S-M53


Pan-Ty locking tie, standard cross section, 7.4 (188mm) length, nylon 6.6, fluorescent orange.

Contact for Pricing

Minimum Qty: 5000

Multiplier: 1000

*Contact for lower quantities*

Panduit PLT2S-M59 - Pan-Ty locking tie, standard cross section, 7.4 (188mm) length, nylon 6.6, fluorescent pink, bulk package.
Panduit

PLT2S-M59


Pan-Ty locking tie, standard cross section, 7.4 (188mm) length, nylon 6.6, fluorescent pink, bulk package.

Contact for Pricing

Minimum Qty: 5000

Multiplier: 1000

*Contact for lower quantities*

Panduit PLT2S-C59 - Pan-Ty locking tie, standard cross section, 7.4 (188mm) length, nylon 6.6, fluorescent pink, standard package.
Panduit

PLT2S-C59


Pan-Ty locking tie, standard cross section, 7.4 (188mm) length, nylon 6.6, fluorescent pink, standard package.

Contact for Pricing

Minimum Qty: 1000

Multiplier: 100

*Contact for lower quantities*

Panduit MLT12S-Q - Pan-Steel Self-locking Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, the smooth edges of 304 stainless steel promote worker safety in indoor environments. Standard cross section, Max bundle diameter: 12in, 39.3in, Tensile strength: 890, 25pc.
Panduit

MLT12S-Q


Pan-Steel Self-locking Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, the smooth edges of 304 stainless steel promote worker safety in indoor environments. Standard cross section, Max bundle diameter: 12in, 39.3in, Tensile strength: 890, 25pc.

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Panduit PLT2S-C55 - Panduit PLT2S-C55 Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Standard cross section, 7.4" (188mm) length. Made of Nylon 6.6, are fluorescent green in color and come in packages of 100.
Panduit

PLT2S-C55


Panduit PLT2S-C55 Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Standard cross section, 7.4" (188mm) length. Made of Nylon 6.6, are fluorescent green in color and come in packages of 100.

Contact for Pricing

Minimum Qty: 1000

Multiplier: 100

*Contact for lower quantities*

Panduit PLT2S-C54 - Panduit PLT2S-C54 Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Standard cross section, 7.4" (188mm) length. Made of Nylon 6.6, are fluorescent yellow in color and come in packages of 100.
Panduit

PLT2S-C54


Panduit PLT2S-C54 Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Standard cross section, 7.4" (188mm) length. Made of Nylon 6.6, are fluorescent yellow in color and come in packages of 100.

Contact for Pricing

Minimum Qty: 1000

Multiplier: 100

*Contact for lower quantities*

Panduit MBS-MR - Panduit Custom-Length Continuous Banding can be cut to just the right length to guarantee a snug fit for your specific project. Plus, the banding is built with 304 stainless steel, so it suits indoor and outdoor environments. Standard, 1000'L (305m), Tensile Strength: 445, Bundles at least 0.5 (13mm), 1pc. MTHS-C head not included.
Panduit

MBS-MR


Panduit Custom-Length Continuous Banding can be cut to just the right length to guarantee a snug fit for your specific project. Plus, the banding is built with 304 stainless steel, so it suits indoor and outdoor environments. Standard, 1000'L (305m), Tensile Strength: 445, Bundles at least 0.5 (13mm), 1pc. MTHS-C head not included.

Contact for Pricing

Panduit MBS-TLR - Panduit Custom-Length Continuous Banding can be cut to just the right length to guarantee a snug fit for your specific project. Plus, the banding is built with 304 stainless steel, so it suits indoor and outdoor environments. Standard, 250'L (76m), Tensile Strength: 445, Bundles at least 0.5 (13mm), 1pc. MTHS-C head not included.
Panduit

MBS-TLR


Panduit Custom-Length Continuous Banding can be cut to just the right length to guarantee a snug fit for your specific project. Plus, the banding is built with 304 stainless steel, so it suits indoor and outdoor environments. Standard, 250'L (76m), Tensile Strength: 445, Bundles at least 0.5 (13mm), 1pc. MTHS-C head not included.

Contact for Pricing

Panduit MBS-TLR316 - Panduit Custom-Length Continuous Banding can be cut to just the right length to guarantee a snug fit for your specific project. Plus, the banding is built with 316 stainless steel, so it can withstand harsh environments. Standard, 250'L (76m), Tensile Strength: 445, Bundles at least 0.5 (13mm), 1pc. MTHS-C316 head not included.
Panduit

MBS-TLR316


Panduit Custom-Length Continuous Banding can be cut to just the right length to guarantee a snug fit for your specific project. Plus, the banding is built with 316 stainless steel, so it can withstand harsh environments. Standard, 250'L (76m), Tensile Strength: 445, Bundles at least 0.5 (13mm), 1pc. MTHS-C316 head not included.

Contact for Pricing

Panduit HTMLT10WEH-LP - Panduit Heat Trace MLT Wave-Ty Ties are designed for superior electric heat trace installation and built with a locking head design to increase productivity. Their wide, flat profile eliminates the puncture risk of wire ties and also reduces the risk of damaging the Mineral Insulated Electric Heat Trace, causing downtime. They can even be installed in 1/3 the time. 304 Stainless steel is non-flammable and UV-resistant. Extra Heavy, 35.9L (912mm), Tensile Strength: 2670, Bundles up to 10.0 (254mm), 50pc.

Panduit Heat Trace MLT Wave-Ty Ties are designed for superior electric heat trace installation and built with a locking head design to increase productivity. Their wide, flat profile eliminates the puncture risk of wire ties and also reduces the risk of damaging the Mineral Insulated Electric Heat Trace, causing downtime. They can even be installed in 1/3 the time. 304 Stainless steel is non-flammable and UV-resistant. Extra Heavy, 35.9L (912mm), Tensile Strength: 2670, Bundles up to 10.0 (254mm), 50pc.

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

Showing 817-828 of 2,697 results