Panduit s TP2-C Cable Tie Plates have slotted mounting holes to accommodate various fastener spacing. With their low profile design, bundles stay close to mounting surface making them ideal for areas where overhead space is limited. These mounts can be used with miniature through standard cable ties and with #6 (M3) screws. For indoor use only, made of Nylon 6.6, are natural in color and come in packages of 100.

Panduit RAMS-S3-M Right Angle Cable Mounts hold cable bundles away from the sharp edges of bulkheads or cabinet holes. They can also be used to mount cable bundles adjacent to any surface. Mounts are .56 x .39 x .44 (14.2 x 9.9 x 11.0 mm) in size and designed for use in indoor environments. Apply with a #3 (M2.5) Screw or 3-32 (2.4) rivet. Made of Nylon 6.6, are natural in color and come packages of 1000.

The cable tie plate in natural color is applied with 1/4" (M6) screws. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in indoor environments. It is used with miniature, intermediate, standard, heavy-standard, light-heavy, and heavy cable ties. It comes in packages of 100.

Panduit KIMS-H430-M6 Push Rivet low profile cable tie mounts keep bundles close to the mounting surface and installs with an integral rivet for a strong, secure installation. Has a 0.169 (4.3mm) size hole for rivet application and is designed for use in indoor enviroments. Made of Nylon 6.6, is blue in color and comes in packages of 1000.

Panduit KIMS-H500-M4 Push Rivet low profile cable tie mounts keep bundles close to the mounting surface and installs with an integral rivet for a strong, secure installation. Has a 0.196 (5.0mm) size hole for rivet application and is designed for use in indoor environments. Made of Nylon 6.6, is yellow in color and comes in packages of 1000.

The lashing tie mounting clip in black is made of weather-resistant nylon 6.6. It is 1.38" long x 0.67 wide (35 x 17 mm). It is applied with a 1/4" (M6) screw and is designed for indoor and outdoor environments. It comes in packages of 100.

The snap-in cable tie mount in gray is applied with rubber adhesive tape. It is made of ABS for indoor environments. It comes in packages of 500.

Control panel switch cable tie mount, .89" (22.6mm) hole.

Control panel switch cable tie mount, 1.22" (31.0mm) hole.

Harness wire end holder, #28-#16 AWG, #8 Screw (M4).

The Tak-Ty Hook and Loop Cable Tie Mount is mounted with a #6 (M3) Screw. The cable tie mount is made of nylon 6.6 and increases mechanical strength, heat and wear resistance, and stiffness. It is used with HLT/HLS Tak-Ty Hook and Loop Cable Ties. The cable tie mount is 1.12 inches L x 1.12 inches W (28.5mm x 28.5mm). It comes in packages of 100.

The Tak-Ty Hook and Loop Cable Tie Mount is mounted with a rubber adhesive. The cable tie mount is made of nylon 6.6 and increases mechanical strength, heat and wear resistance, and stiffness. It is used with HLT/HLS Tak-Ty Hook and Loop Cable Ties. The cable tie mount is 1.12 inches L x 1.12 inches W (28.5mm x 28.5mm). It comes in packages of 100.