Snap-on flange clip for cable support. It fits flanges 1/16" to 3/16" thick and accepts AC/MC cable with outside diameter 0.968" to 1.250". The clip is made of spring steel with a zinc plated finish and silver color. It supports flexible conduit and all types of cable from flanges.

A cable clip flange adapter in the F2 series. It is made of high-carbon steel and is designed for mounting on 5/8"-3/4" flanges. The mounting type is flange adapter.

Snap-on flange clip for cable support. It fits flanges 1/16" to 3/16" thick and accepts AC/MC cable O.D. from 0.312" to 0.375". The clip is made of spring steel with a zinc-plated finish and silver color. It is used to support flexible conduit and all types of cable from flanges.

Snap-on flange clip for cable support. It fits flanges 1/16" to 3/16" thick and accepts AC/MC cable with an outside diameter of 0.375" to 0.437". The clip is made of spring steel with a zinc plated finish and silver color. It supports flexible conduit and all types of cable from flanges.

Snap-on flange clip for cable support. It fits flanges 1/16" to 3/16" thick and accommodates AC/MC cable O.D. from 0.218" to 0.281". The clip is made of spring steel with a zinc-plated finish and silver color. It supports flexible conduit and all types of cable from flanges.

Panduit FCH2-A-T14 Flat Cable Clips have a low profile design and hold wires, cables and tubing. They can be used with any width flat cable with a maximum stacking height of .17 (4.3mm). Their large mounting base provides high bonding strength. They are 2.0 (50.8mm) wide and for use in indoor environments. This part uses rubber adhesive as a mounting method. Made of Nylon 6.6, are gray in color and come in packages of 200.

Panduit FCH2-A-C14 Flat Cable Clips have a low profile design and hold wires, cables and tubing. They can be used with any width flat cable with a maximum stacking height of .17 (4.3mm). Their large mounting base provides high bonding strength. They are 2.0 (50.8mm) wide and for use in indoor environments. This part uses rubber adhesive as a mounting method. Made of Nylon 6.6, are gray in color and come in packages of 100.

Panduit FCH2-S6-C14 Flat Cable Clips have a low profile design and hold wires, cables and tubing. They can be used with any width flat cable with a maximum stacking height of .17 (4.3mm). Their large mounting base provides high bonding strength, or can be screw applied, using a #6 (M3) screw. They are 2.0 (50.8mm) wide and for use in indoor environments. Made of Nylon 6.6, are gray in color and come in packages of 100.

Panduit VWS3750-M Vertical Wire Saddles are designed with a funnel entry to allow fast insertion of wires and cables. The wing push mount design provides added stability. For use in indoor environments and with maximum bundle range of 0.38 x 0.50 (9.7mm x 12.7mm). Made of Nylon 6.6, are natural in color and come packages of 1000.

Panduit ABDCM30-A-C dynamic cable manager mounts provide panel strain relief during the opening and closing of electrical cabinet doors. Mounts are 1.12" x 1.12" (28.5 x 28.5 mm), mounted with rubber-based adhesive tape and are used with miniature, intermediate, and standard cable ties. The mounts are made of nylon 6.6, white in color and come in packages of 100.

Corrugated tubing holder push mount with umbrella, .19" (5mm) nominal diameter.

Bridle ring, 1.25 dia., 1/4-20 threaded.