Insulated service entrance staple for #4/0 Type SE, Style SER cable. It is made of high-carbon steel with molded plastic insulation and silver/grey color. The staple size is 1.438 in diameter and it is UV stabilized for severe weather conditions.

Insulated plastic staples for securing cable. They are made of steel and plastic with molded plastic insulation and a silver finish. The sheet lists nail-in construction and cable size capacity for 2 & 3-wire NM cable up to #12, 2-wire UF cable up to #12, and other cable up to 1/2" wide.

Insulated plastic sheathed cable staple for 3-wire #8 and #6 NM cable and other cable up to 21/32" wide. It is made of zinc plated steel with a molded plastic construction and a plastic insulator. The staple is gray/silver and is UV stabilized for severe weather conditions.

Insulated plastic staples with a nail-in construction. They are made of steel and plastic with molded plastic insulation and a silver color. The cable size listed is 2 & 3-wire NM cable up to #12, 2-wire UF cable up to #12, and other cable up to 1/2" wide.

This is a water pipe staple for secure mounting of wire and cable without damage. It is sized for 3/4 inch plastic water pipe and copper tubing with a 0.937 inch diameter. The staple is made of zinc plated high carbon steel and is tan in color.

Insulated plastic staples for nail-in cable fastening. They are made of steel and plastic with molded plastic insulation and a silver finish. The cable size note states they are for stacking two 3-wire, or four 2-wire, #14 or #12 NM cable.

1/4 2-NAIL, GRAY (100/BOX)

Non-insulated heavy duty cable staple for 2 conductor #12 and #14 non-metallic sheathed cable and other cable. The staple is 1 inch long by 1/2 inch wide. It is identified on the sheet as 1/2 NMCbl STAPLE HD (5M/KEG).

The CCPLTR3139-X Polymer Trefoil Cable Cleat is ideal for medium to high short circuit faults in less harsh environments. The cable cleat is certified to IEC 61914:2015, tested up to 136kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 31-39mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolt. Features glass filled nylon material and rounded edges for cable insulation protection.

The CCPLTR2633-X Polymer Trefoil Cable Cleat is ideal for medium to high short circuit faults in less harsh environments. The cable cleat is certified to IEC 61914:2015, tested up to 136kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 26-33mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolt. Features glass filled nylon material and rounded edges for cable insulation protection.

The CCPLTR2228-X Polymer Trefoil Cable Cleat is ideal for medium to high short circuit faults in less harsh environments. The cable cleat is certified to IEC 61914:2015, tested up to 136kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 22-28mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolt. Features glass filled nylon material and rounded edges for cable insulation protection.

The CCPL1H1923-X Polymer One-Hole Cable Cleat is ideal for lower to medium short circuit faults in less harsh environments. The cable cleat is certified to IEC 61914:2015, tested up to 69.5kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 19-23mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Features glass filled nylon material and rounded edges for cable insulation protection.