Showing 2617-2628 of 2,717 results
3/4-10 drop-in anchor made from Type 304 stainless steel. The anchor length is 3-1/4 inches. It requires a 1-inch drill bit diameter.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
This is a 1/2-13 x 2-1/2 inch hex head cap screw. It is partial threaded and made of 316 stainless steel. The product is supplied in a jar.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Hex head cap screw with partial threading. It is made of 18-8 stainless steel and has a 5/8-11 thread size with 4 in length. The sheet identifies it as a box item.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Hex head cap screw, partial threaded, in 316 stainless steel. Size is 1/2-13 x 3-1/2 inches. Supplied in a jar.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
This is a drop-in anchor made from Type 316 stainless steel. It is sized 3/8-16 and has a 1-5/8 inch length. The sheet also lists a 1/2 inch drill bit diameter for installation.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
This is a 5/8-11 x 3-1/2 inch hex head cap screw. It is partial threaded and made of 316 stainless steel. The product is supplied in a box.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
This is a 3/4-10 x 3 inch hex head cap screw with partial threading. It is made of 316 stainless steel. The product is supplied in a box.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Hex head cap screw, fully threaded. It is made of 18-8 stainless steel. The size is 5/8-11 x 1-1/4 in.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
This is a 1/4"-20 drop-in anchor with internal threads and a 1" anchor length. It is made of stainless steel with a plain finish. The sheet lists a 3/8" drill size, 0.250" diameter, 0.875" thread length, and 1.000" minimum embedment depth.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 1/2 x 4 inch sleeve anchor with hex nut. It is made of Type 304 stainless steel. The drill bit diameter is 1/2 inch and the minimum embedment is 1-1/2 inches.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Carriage bolts sized 5/16-18 x 1-1/2 inch. Made from 18-8 stainless steel. Supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 2617-2628 of 2,717 results