Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Steel with Magnets

Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 1-5/8 Inches, Hole Diameter 9/16 Inches on 1-7/8 Inch Centers, Electro-Galvanized Steel

Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Type 316 Stainless Steel

A 4 hole offset corner angle angular fitting made of carbon steel. It has an electro-galvanized finish. The listed dimensions are 1-5/8 in. height, 5-3/8 in. width, 1-7/8 in. depth, and 1/4 in. thickness.

A 2-hole open 45 degree corner angle made from Type 316 stainless steel. The sheet identifies it as a steel angle with a 45 degree angle. It is intended for corner-angle applications and is made of 316 stainless steel.

A 2-hole open 45 degree corner angle made from Type 304 stainless steel. The sheet identifies the angle as 45 degrees and the material as 304 stainless steel. It is a stainless steel angle used where a 45 degree corner angle is needed.

Z fitting corner brace with 8 holes. It is zinc plated. The sheet identifies it as catalog number FZB8HEG.

Z fitting 2 hole support with a 7 inch length. It is electro-galvanized for finish and has a thickness of 1/4 inch. The outside width is 1-5/8 inch and the hole diameter is 9/16 inch.

Z fitting 2 hole support for steel angle applications, sized 5 inches. It has a 1/4 inch thickness and an outside width of 1-5/8 inch. The holes are 9/16 inch diameter and the finish is electro-galvanized.

Z fitting 2 hole support with a 6 in length. It is made with a 1/4 in thickness and has an outside width of 1-5/8 in. The holes are 9/16 in diameter and the finish is electro-galvanized.

A steel angle fitting identified as 1 S Hooks ZP with the descriptor Z Fitting Cross 2 Hole 3-1/4. The sheet does not list material, finish, or dimensional attributes in the product attributes table. Catalog number FZX2H325EG is shown on the sheet.

Z fitting offset 2 hole support with a zinc plated finish. The sheet identifies it as a 5/32-3/16 pin hex bit. No additional dimensions or material details are printed on the sheet.