Z fitting 2 hole support for 4-inch use. It is made with 1/4-inch thickness and has an outside width of 1-5/8 inches. The holes are 9/16 inch in diameter and the finish is electro-galvanized.

A 4 hole open 45 degree corner angle. It is zinc plated. The sheet does not list any additional dimensions or material details.

Fitting, 90 Degree, Height 2-1/4 Inches, Base Length 1-5/8 Inches, Width 1-5/8 Inches, Hole Diameter 9/16 Inches, Stainless Steel

Fitting, 90 Degree, Height 1-7/8 Inches, Base Length 2 Inches, Hole Diameter 9/16 Inches, Hot-Dip Galvanized Steel

Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Stainless Steel

Fitting, 90 Degree, Height 2-1/4 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Stainless Steel

Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Electro-Galvanized Steel

Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Steel with Magnets

Fitting, 90 Degree, Height 2-1/4 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Type 316 Stainless Steel

A Z fitting corner brace with 3 holes. It is zinc plated. The sheet identifies it as catalog number FZB3HEG.

A 2 hole open 45 degree corner angle. It is made of electro-galvanized steel with a zinc plated finish. The angle is 45 degrees and is used as a steel angle component.

90 Degree Angle Fitting, 1-7/8 Inch X 5-7/8 Inch