Angular Fitting. Closed 45 Degree Angle. 4 Holes. 4-7/8 Inch side X 5-1/4 Inch side X 1-5/8 width. Zinc coating is applied by hot-dipping after fabrication. Is in conformance with ASTM A-123, Grade 65 specification standards. Minimum of 2.5 mill thickness.

Support, Z Shape, Two Holes with Hole Size 1 Inch with 1-7/8 Inch Spacing on Center, Hot-Dip Galvanized Steel, For use with A Series Channel

Support, U Shape, Length 5-1/8 Inches, Depth 1-5/8 Inches, Holes 1 Inch on 1-7/8 Inch Centers, Hot-Dip Galvanized Steel, For A Series Channels

Support, U Shape, Length 5-1/8 Inches, Depth 1-5/8 Inches, Holes 1 Inch on 1-7/8 Inch Centers, Green Urethane Powder Coated Steel, For A Series Channels

Support, U Shape Channel Joiner, Length 4-1/2 Inches, Depth 1-11/32 Inches, Width 1-3/8 Inches, Holes 3/4-16 Inch UNF Thread on 1-7/8 Inch Centers, Steel

Support, U Shape, Width 5-3/8 Inches, Depth 3-1/4 Inches, Hole Size 1 Inch with 1-7/8 Inch Spacing on Center, Hot-Dip Galvanized Steel, For use with A Series Channel

Connector U Support, Length 4-7/16 Inches, Width 1-1/2 Inch, Depth 1-3/4 Inches, Electro-Galvanized Steel with 9/16 Inch Holes

Connector Open Angle, Length 3 Inches with 1-1/2 Inch after 45 Degree Bend, Width 1-1/2 Inches, Steel with 9/16 Inch Holes on 1-1/2 Inch Centers

Connector Left-Hand Gusset, Length 4-1/2 Inches, Length From Beam 3 Inches, Steel with 9/16 Inch Holes on 1-1/2 Inch Centers

Connector Wide U Support, Length 6-1/4 Inches, Width 1-1/2 Inch, Depth 1-9/16 Inches, Steel with 9/16 Inch Holes

Connector Brace, Length 3 Inches, Width 1-3/4 Inches, Height 2-5/16 Inches, Steel with 9/16 Inch Hole 1-9/16 Inch from Channel

Connector Five-Hole Joint, Length 3 Inches, Width 3 Inch, Steel with 9/16 Inch Holes