Support, Z Shape, Two Holes with Hole Size 1 Inch with 1-7/8 Inch Spacing on Center, Galvanized Steel, For use with B Series Channel

Fitting, Wing Shape, Length 5-7/16 Inches, Height 3-7/8 Inches, Channel Size 1-5/8 Inches X 1-21/32 Inches, Hole Diameter 9/16 Inch, Type 316 Stainless Steel

45 Degree Obtuse, Open Angle Fitting, 316 Stainless Steel, 4 Holes, 3-7/16 inch X 3-5/8 inch legs

L-shaped Bracket. 4 Holes, 9/16 Inch Diameter. 4-1/8 Inch X 1-3/8 Inch X 3-1/2 Inch wide, Tapered on long side. 316 Stainless Steel.

Support, U Shape, Length 5-3/8 Inches, Depth 1 Inch, Holes 1 Inch on 1-7/8 Inch Centers, Hot-Dip Galvanized Steel, For D Series Channels

A 3 hole cross corner angle made from Type 316 stainless steel. It measures 3-1/2 in long, 1-5/8 in wide, and 2-1/4 in high. The thickness is 1/4 in and it has 3 holes.

Support, U Shape Channel Joiner, Length 4-1/2 Inches, Depth 1-11/32 Inches, Width 1-3/8 Inches, Holes 3/4-16 Inch UNF Thread on 1-7/8 Inch Centers, Steel, Use with 14 Gauge Channel

Fitting, Triple Wing Shape, Length 5-13/32 Inches, Height 2 Inches, Width 3-1/2, Channel Size 1-5/8 Inches X 1-21/32 Inches, Hole Diameter 1 Inch, Hot-Dip Galvanized Steel

Support, U Shape, Four Hole, Length 7-1/4 Inches, Holes 1 Inch on 1-7/8 Inch Centers, Electro-Galvanized Steel, For A Series Channels

Bracket, 90 Degree, Height 6 Inches, Length 18-1/2 Inches, Width 1-5/8 Inch, Hole Diameter 9/16 Inch, Design Uniform Load 1,000 Pounds (A1200 Series) 750 Pounds (A1400 Series), Steel

90 Degree Fitting, Material GoldGalv Steel, Holes, 1 Slot

Angular Fitting. Open 45 Degree Angle. 4 Holes. 4-7/8 Inch side X 5-1/4 Inch side X 1-5/8 width. Zinc coating is applied by hot-dipping after fabrication. Is in conformance with ASTM A-123, Grade 65 specification standards. Minimum of 2.5 mill thickness.