Connector Outside Corner, Length 4-3/4 Inches, Width 3 Inch, Steel with 9/16 Inch Holes

Connector Rod, Length 3-5/8 Inches, Depth 1-1/2 Inches, Width 1-1/2 Inches, Steel with 9/16 Inch Hole on 1-1/2 Inch Centers

Connector Two-Side Corner, Length 4-1/2 Inches, Length From Beam 4-1/2 Inches, Width 1-1/2 Inches, Steel with 9/16 Inch Holes on 1-1/2 Inch Centers

Connector Post Base, 6 Inch Square Base, Length of Connector 3 Inches, Width of Connector 1-3/4 Inch, Hot-Dip Galvanized Steel with 3/4 Inch Holes on 1-1/2 Inch Centers

Fitting, Right Wing Shape, Length 5-3/8 Inches, Height 1-5/8 Inches, Width 5-1/8, Channel Size 1-5/8 Inches X 1-21/32 Inches, Hole Diameter 1 Inch, Steel

RO14 is a rod hanger bracket support for suspending rod or wire from overhead mountings. It is made of spring steel with a zinc phosphate finish. The size is for use with #8 wire or 1/4" plain rod, and it has a clearance hole for a 1/4" bolt.

JSM Orion03 - 4 rotation brackets for Orion1 Base. For all lengths, 2 brackets should be used per unit (transmitter or receiver unit).

JSM Orion05 - 4 rotation brackets for Orion3. For 500, 800 and 900 mm units, 2 brackets should be used per unit (active or passive unit). For 1200 mm units, 3 brackets should be used per unit.

JSM Orion04 - 4 rotation brackets for Orion2. For all lengths, 2 brackets should be used per unit (transmitter or receiver unit).

PVC Coated Steel Open Angle Connector, 45 Degree, Bend, 3 Holes, 9/16 Inch Diameter, Gray

PVC Coated Steel Angle Fitting with Goldgalvanized Finish, 90 Degree, Size 1.875 Inch x 2.000 Inch x 1.625 Inch, Gray

Support, Z Shape, Two Holes with Hole Size 1 Inch with 1-7/8 Inch Spacing on Center, Stainless Steel, For use with A Series Channel