A 4-hole 3-way corner angle angular fitting. It is made of 304 stainless steel and is mounted with nut and bolt. The fitting has 9/16 in mounting holes and a width of 1-5/8 in.

2-Hole Closed 45 Degree Corner Angle, Type 316 Stainless Steel

Bracket 3-5/8 Channel With Brace 30" Electrogalvanized

A 4-hole 3-way corner angle angular fitting. It is made of 316 stainless steel. The fitting has 9/16 in mounting holes and a width of 1-5/8 in. It is mounted with nut and bolt hardware.

A 4 hole 45 degree angle angular fitting. It has a green finish and is sized 1-5/8 in wide. The mounting holes are 0.562 in wide and it mounts with nut and bolt.

A 2-hole corner angle strut fitting. It is made of 316 stainless steel. The fitting has 2 mounting holes with 9/16 in. diameter and is intended for nut-and-bolt mounting. Overall dimensions listed are 1-5/8 in. width, 1-7/8 in. height, 2 in. depth, and 1/4 in. thickness.

A 4-hole corner angle angular fitting for nut-and-bolt mounting. It is made of 316 stainless steel. The fitting has 4 mounting holes with 9/16 in diameter and a width of 1-5/8 in.

Wall Mounting Bracket, Mechanical Support, Stainless Steel, 40kA. Includes (6) Cap Plugs, (6) Hex Nuts 1/2-13, (6) Lock Washers, (12) Flat Washers, (6) Hex Head Cap Screws, (1) Left Foot, (1) Right Foot, (1) Wall Bracket and Instruction Sheet IS-1184.

Bracket for Junction, 2 Point, 600 Amp, 35kV, Hardware Pacjage consists of Brackets and Straps Only

Hold Down Bracket Prepack. 13 Gage 304 Stainless Steel. 3.124 x 2.675 inch x Widest Width at Pad .625 inch. 2.5 inch between Holes. 0.375 inch Diameter Holes on each Side of Bracket.

Wire Basket Trapeze Support Bracket can be used to support baskets ranging from 4" wide through 12" wide from threaded rod. It comes in an electro zinc plated finish. This kit comes packaged in quantities of 50 pieces. Threaded rod, washers, and nuts not included.

1-1/2" Standoff Bracket for Decking (Complies NEC® Sec. 300.4(E)), 1/4" Mounting Holes, Pre-Galvanized Steel