Hollow wall anchor for use in a pre-drilled hole in drywall, sheetrock, plaster, or paneling. It is made of steel with a zinc plated finish. The anchor is extra short, with a 1/8 in diameter, 1 in length, and 1/4 in drill size.

A hollow wall anchor for use in drywall, sheetrock, plaster, or paneling with a pre-drilled hole. It is made of steel with a zinc plated finish. The anchor is 3/16 in. diameter, 2-3/4 in. long, and uses a 10-24 screw size.

Hollow wall anchor for light-weight duty installations in drywall, sheetrock, plaster, or paneling. It is made of steel with a zinc plated finish and has a combo Phillips/Slotted head. The anchor is extra long, with a 3/16" diameter, 3-1/2" length, 3/8" drill size, 1-3/4"–1-1/4" grip range, and 10-24 screw size.

Hollow wall anchors for use with a pre-drilled hole in drywall, sheetrock, plaster, or paneling. They are light-weight duty anchors designed to resist vibration and, when properly installed, will not crack or crumble the wall material. These anchors are steel with a zinc plated finish and are sized 1/4 in. diameter by 2-1/4 in. length.

This is a lag screw shield for mortar joint applications. It is made of zinc and has no additional finish. The shield is 3/8 in diameter, 1-3/4 in long, and requires a 1/2 in drill size with a 3/8 in screw size. Minimum embedment depth is 2-1/4 in.

A hollow cylindrical lead screw anchor with longitudinal ribs and a tapered split end. It is used with wood screws, lags, and tapping screws for light-duty applications in brick, block, drywall, masonry, or concrete. The anchor is 1-1/2 in. long and conforms to irregular, out-of-round holes.

Nylon nail-in anchors with a mushroom head for light-duty fastening. They are designed for attaching termination bar to solid concrete, solid brick, block, or masonry walls. The anchor material is nylon and the nail material is steel with a zinc-plated finish.

A hollow, cylindrical lead screw anchor with longitudinal ribs and a tapered split end. It is used with wood screws, lags, and tapping screws for light-duty applications in brick, block, drywall, masonry, or concrete. The anchor is made of lead alloy and is sized for #6-8 screws with a 1/4 in drill size.

Nylon hammer drive anchors designed for attaching termination bar to solid concrete, solid brick, block, or masonry walls. They have a mushroom head and are described as light duty and removable. The anchor is 1/4" x 3" with a 1/4" drill size and a 1.250" minimum embedment depth.

Sleeve anchor for use in cinder block, brick, thin wall, and concrete. It is made of steel with a zinc plated finish. The anchor size is 1/4" x 1-3/8" and it has a washer & acorn nut head type.

This is a lead screw anchor for use with wood screws, lags, and tapping screws in light duty applications. It is made of lead alloy and is intended for brick, block, drywall, masonry, or concrete. The anchor is sized #10-12-14 and is 1-1/2 inches long with a 5/16 inch drill size.

These are 1/4 x 1-1/2 inch nylon nail-in anchors with a mushroom head and light-duty removable design. The anchor material is nylon and the nail material is steel with a zinc-plated finish. They are designed for attaching termination bar to solid concrete, solid brick, block or masonry walls.