A hollow wall anchor for use in wallboard. It is made of zinc and is described as a #6 Mini EZ Anchors™ product in a jar. The anchor size is 7/16" x 1-1/4" and it is intended for 3/8", 1/2", or 5/8" wall board.

Hammer drive anchors for attaching termination bar to solid concrete, solid brick, block, or masonry walls. They are made of zinc alloy with a zinc plated finish. The size is 1/4 in. x 2 in., with a 1/4 in. drill size, 0.547 in. head diameter, mushroom head, and 1.000 in. minimum embedment depth.

A 5/16 x 2-1/2 in. sleeve anchor with hex nut. It is made of Type 304 stainless steel. The sheet lists a drill bit diameter of 5/16 in. and a minimum embedment depth of 1-3/16 in.

This is a 3/8 x 4 inch sleeve anchor with a flat head. It is made of Type 304 stainless steel. The sheet lists a 3/8 inch drill bit diameter and a minimum embedment depth of 1-1/4 inch.

This is a 3/8 x 5 inch sleeve anchor with a flat head. It is made from Type 304 stainless steel. The sheet lists a 3/8 inch drill bit diameter and a minimum embedment depth of 1-1/4 inch.

This is a hollow wall anchor kit for drywall and horizontal applications. It uses a white nylon anchor with a zinc plated steel screw and is sized #6 x 1-1/4" overall. The sheet lists a 3/8" diameter, 1" thread length, and a holding weight of 25 lbs in 3/8" drywall, 30 lbs in 1/2" drywall, and 40 lbs in 5/8" drywall.

A 1/4 x 2 inch sleeve anchor with a flat head. It is made of Type 304 stainless steel. The sheet lists a 1/4 inch drill bit diameter and a minimum embedment of 1-1/8 inch.

A 3/8 x 3 inch sleeve anchor with a flat head. It is made of Type 304 stainless steel. The sheet specifies a 3/8 inch drill bit diameter and a minimum embedment of 1-1/4 inch.

An all-steel pre-assembled single unit sleeve anchor designed for use in concrete or masonry base materials. It is made of stainless steel and has a Phillips flat head. The size is 1/4" x 3" with a 1/4" drill diameter and a minimum embedment of 1-1/8".

Acoustical wedge anchors for overhead suspensions. Made of steel with a zinc plated finish. Size is 1/4" x 2-1/4" with a 1/4" diameter, 2-1/4" length, 1-1/2" minimum embedment depth, and 1/4" drill size. Rated at 1,180 lbs tension strength and 1,400 lbs shear strength in 2000 PSI concrete.

This is a Mini EZ Anchors kit for use in wallboard. It includes zinc anchors with #6 x 1.000 in fine thread drywall screws and a #2-2 in hex power bit. The anchor is 7/16 in x 1-1/4 in, with a 0.438 in diameter and 1.250 in length.

An Alligator Anchor Kit containing plastic and steel components. It includes #10-12 Alligators, #10 x 1-1/4 in fasteners, and a 1/4 in carbide bit. The anchor has a 0.190 in diameter and 1.250 in length, with a 1/4 in drill size and square drive.