A threaded rod anchor for hanging threaded rod from wood structures with horizontal mounting. It is made of steel with an electro-zinc finish. The sheet lists a 1/4 in size, 2 in length, and 3/8 in rod size.

Vertical threaded rod anchor installed vertically into wood with an internally threaded head for receiving threaded rod. It is made of steel with a yellow dichromatic finish for corrosion protection. The anchor is 3/8 in. size and 1-7/8 in. long with 16 TPI internal thread size.

Vertical rod hanger for suspending steel threaded rod vertically in steel fixtures. It is made of carbon steel with a zinc plated finish. The sheet lists a 3/8"-16 rod coupler size and 1/4-20 x 1-1/2" #3 thread size. Ultimate load capacities are 785 lbs for 16 steel gauge and 1140 lbs for 14 steel gauge.

Threaded rod anchor for horizontal mounting into the side of steel structures. It is made of steel with an electro-zinc finish. The sheet lists a 1/4" size, 1" length, 14 thread size, and 1/4" rod size.

Minerallac 1/4" x 2" Hangermate Rod Hanger, Wood, Horizontal Mounting, 3/8" Rod, Zinc Plated, 50/Jar.

Minerallac 12-20" x 1-3/4" #5 Hangermate Rod Hanger, Steel, Pivot Mounting, 3/8" Rod, Zinc Plated, 50/Jar.

Minerallac 1/4-20" x 1-1/2" #5 Hangermate Rod Hanger, Steel, Horizontal Mounting, 3/8" Rod, Zinc Plated, 50/Jar.

Vertical threaded rod anchor installed vertically into wood with an internally threaded head for receiving threaded rod. It is made of steel with a yellow dichromatic finish for corrosion protection. The screw is 1-7/8 in long and sized 3/8 in with 16 TPI internal threads.

Vertical threaded rod anchor for installing vertically into steel with an internally threaded head for receiving threaded rod. It is made of steel with a yellow dichromatic finish for corrosion protection. The anchor is sized 1/4 in. and is 1-7/8 in. long. It has an internal thread size of 20 TPI.

This is a threaded rod anchor for vertical mounting into the bottom of steel structures. It is made of steel with an electro-zinc finish. The listed length is 1-1/4 in and the rod size is 3/8 in.

Swivel x-Press 20 rod anchor for 22-20 gauge metal deck with 45° mounting. It is made of steel with an electro-zinc finish and is designed for 3/8" rod. The swivel head allows anchoring to metal decking at an adjustable angle, and it is intended for applications where access to the back of the installed fastener is prohibited.

Threaded rod anchor for installing vertically into the bottom of steel structures for hanging threaded rod. It is made of steel with an electro-zinc finish. The anchor is 1-1/2 in. long, uses a 24 thread size, and is sized for 3/8 in. rod.