This is a 1/4" anchor setting tool for steel drop-in anchors. It is made of steel with a zinc-plated finish. The tool is 3-1/2" long and 3/8" wide, and it uses a hammer style.

This is a 3/8" anchor setting tool for steel drop-in anchors. It is made of steel with a zinc plated finish. The tool is 5" long and 1/2" wide, and uses a hammer style.

A 1/2 inch anchor setting tool for steel drop-in anchors. It is made of steel with a zinc plated finish. The tool is 5 inches long and 1/2 inch wide, with a hammer style.

This is a Tapcon installation kit for the Tapcon Concrete Fastening System. It is made of steel with a zinc finish. The kit measures 7-1/4 in long and 1/2 in wide.

Universal X-Press It installation tool with bit receiver and 25/64" drill bit. Made of steel with a zinc plated finish. It is 6-1/4" long and 1-1/2" wide, and is for use with SAMMY XP20, XP35, SWXP35, SXP20, and SXP35 anchors for metal deck and purlin.

Socket driver for 3/8" threaded rod. It is an installation tool for installing rod hangers in concrete. The sheet identifies it as a vertical mount driver.

Rod Hanger Driver Wood/Steel

Socket driver for 1/4" rod hangers. It is an installation tool for installing rod hangers in concrete. The sheet identifies it as a vertical mount driver.

Socket driver installation tool for installing wood rod hangers in wood. It is made of steel with a polished finish. The sheet identifies it as a wood socket drive tool for driving wood rod hangers.

This is a drop-in anchor setting tool for installing 3/8" drop-in anchors. It has a pin length of 33/64". The sheet identifies it as a Cully tool from Minerallac.

A Sammys installation tool for Swivel Sammys 3/8" Rod SH-TEK 50 and SH-GST/CST 20. It is made of steel with a nickel finish. The tool has a #14 drive size and a hex shank type.

HangerMate threaded rod anchoring system installation tool for 3/8-16 or 1/4-20 threaded rod. It is a HangerMate Driver (ZE 215) made of steel with a plain finish. The tool measures 2-7/16 in. long and 3/4 in. wide.