Showing 697-708 of 1,783 results
250V Time Delay Glass 1/4" x 1 1/4" 250V Volts 0.04 amps GDL series.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
Mersen's complete line of single and dual pole in-line fuseholders accommodate Class CC fuses. The fuseholders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuseholder providing a water-resistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection. Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard). Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuseholder can be easily reconnected. Y terminal boot
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
In-line fuseholders for blade type automobile fuses. stranded wire leads are stripped back 1/4 For AF & AF2 fuses 32 Volts 30 amps AFH (with cap) series.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
PC board mount fuse clip for 5mm diameter fuses, 1/4" diameter fuses, and 13/32" diameter fuses 250 Volts 15 Amps 1/4 inch ferrule (silver plated) series.
Contact for Pricing
Contact for Pricing
Contact for Pricing
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
300V 3/10 to 10A Fuse for protection of fluorescent lighting fixtures and ballasts 300 Volts 1 Amps SMF series.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
300V 3/10 to 10A Fuse for protection of fluorescent lighting fixtures and ballasts 300 Volts 3 Amps SMF series.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
Ferraz Shawmut Fuse Clip Clamps are used to clamp fuse clips together onto a fuse ferrule or blade. An easy twist of the cap tightens the jaws against the clip, preventing heating by reducing resistance at the point where fuse and clip make contact. 600 Volts 200 Amps knife blade fuses.
Contact for Pricing
300V 1/2 to 15A Fuse for protection of fluorescent lighting fixtures and ballasts 300 Volts 1 Amps SLR series.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
300V 1/2 to 15A Fuse for protection of fluorescent lighting fixtures and ballasts 300 Volts 2 Amps SLR series.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
Showing 697-708 of 1,783 results