nVent X230226G360 Extreme Envrs Air Conditioner, 22.29x10.23x13.64, 1890BTU 230V Ht ACP L2, SS304
UPC: 783510573621
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Energy-efficient rotary compressor
- R513A or R134a refrigerant
- Reliable Smart Controller on enclosure side of the unit
- 10-degree sloped top shroud, welded and ground
- Sloped internal surfaces reduce catchpoints for water, dust, bacteria build-up
- FDA-approved neoprene gasket
- No louvers on vertical surfaces allow washdown with minimal protections
- Cutout Adapter options for enclosures with older nVent HOFFMAN or Competitive units for easy transitions to new air conditioners
- Cleanable, reusable aluminum mesh filter included to protect coils for maximum cooling performance in dirty environments
- UL Listed to save customers time and money with agency approvals
Specifications
Application | Controls and Drives;Corrosive Environments;Power Distribution |
Color | Unpainted |
Depth | 346 mm |
Depth | 13.64 in |
Finish | Brushed #4 |
Height | 566 mm |
Height | 22.29 in |
Material | Stainless Steel 304 |
Material | SS304 |
Max Current | 2.9 A |
Nominal Capacity Btu/h | 1,890 Btu/h |
Nominal Capacity Watts | 550 W |
Nominal Voltage | 230 V |
Nominal Voltage | 220 V |
Number Of Phases | 1 |
Operating Temperature | -40-55 °C |
Operating Temperature | 131 |
Operating Temperature | 55 |
Operating Temperature | -40-131 °F |
Operating Temperature | 55 °C |
Outdoor Installation | Yes |
Product Family | Extreme Environments |
Protection Rating | NEMA Type 12 |
Refrigerant | R134a |
Remote Access Control | Yes |
Series | X23 |
Size | 22.29x10.23x13.64 inches |
Type | Air Conditioners |
Voltage Rating | 230 V |
Weight | 65 lb |
Width | 10.23 in |
Width | 260 mm |
Package Dimensions (L x W x H) | 18 IN x 13.63 IN x 24.94 IN |
Package Dimensions (L x W x H) | 45.72 cm x 34.6202 cm x 63.3476 cm |
Package Weight (Imperial) | 80.000 L |
Package Weight (Metric) | 36.288 kg |
TCW41NBSBA10104
The nVent TCW41NBSBA10104 cable tray system is designed for reliable and efficient cable management in industrial and commercial environments. Engineered for durability and ease of installation, this system ensures optimal organization and protection of electrical cables. Its robust construction and versatile design make it suitable for a wide range of applications, including power distribution, data cabling, and industrial automation. The nVent TCW41NBSBA10104 is built to withstand harsh conditions, providing long-term performance and safety. Trust nVent for high-quality cable management solutions that meet the demands of modern infrastructure.Frequently Asked Questions
What are the dimensions of the X230226G360 air conditioner?
The air conditioner has dimensions of 22.29 inches in height, 10.23 inches in width, and 13.64 inches in depth.
What is the cooling capacity of this air conditioner?
The air conditioner has a nominal capacity of 550W or 1890 BTU/h.
What is the operating temperature range for this unit?
The air conditioner can operate in temperatures ranging from -40 to 131°F (-40 to 55°C).
What type of refrigerant does this air conditioner use?
This air conditioner uses R134a refrigerant.
What is the nominal voltage for this air conditioner?
The nominal voltage for this air conditioner is 230V.
What material is the air conditioner constructed from?
The air conditioner is made of Stainless Steel 304 with a brushed #4 finish.
What is the weight of the air conditioner?
The air conditioner weighs 65lb.
What industry standards does the X230226G360 meet?
It is UL/cUL Listed and meets Type 12, 4, 4X, IP66/IP69/IP69K (Internal Loop), IP34 (External Loop), and is Telcordia GR-487 capable.
Does this air conditioner have remote access capabilities?
Yes, this air conditioner features remote access control.
Is a filter included with this air conditioner?
Yes, a cleanable, reusable aluminum mesh filter is included to protect the coils.
How to Install the X230226G360 Extreme AC Air Conditioner
Installation guide for mounting and wiring the X230226G360 Extreme AC Air Conditioner.
Estimated time: 45m
Tools needed:
Wrench, Ratchet driver, Screwdriver
Supplies needed:
Gasket kit, Mounting bolts, Washers
- Inspect and Test Functionality
Before mounting, inspect the air conditioner for any shipping damage. Test its functionality by connecting it to a properly grounded power supply and operating it for 5-10 minutes. Ensure no excessive noise or vibration is present, and that the condenser blower, evaporator blower, and compressor are running. Condenser air temperatures should increase within a few minutes. If the unit was in a horizontal position, ensure it has been upright for at least 5 minutes before operation. Do not operate the unit while horizontal or on its side, as this can cause permanent damage and void the warranty.
- Prepare Enclosure for Mounting
Using the cutout dimensions provided in the manual, prepare the enclosure for the air conditioner. This includes creating the necessary opening and drilling the mounting bolt hole pattern as specified in the 'Mounting Cutout Dimensions' section.
- Install Gaskets
Using the provided gasket kit, install the gaskets onto the enclosure. Use the prepared cutout and bolt hole pattern as a guide for proper placement.
- Mount the Air Conditioner
Mount the air conditioner onto the enclosure using the provided mounting bolts and washers. Start the bolts by hand to avoid cross-threading, then tighten them with a wrench or ratchet driver to a torque of 22.5 in-lb (2.5 Nm). Ensure the unit remains upright during this process.
- Connect Power
Refer to the top of the nameplate for electrical requirements. Connect the power cord to a properly grounded power supply. Use of an extension cord is not recommended. The electrical circuit should be fused with a slow blow or HACR circuit breaker. Ensure the minimum circuit ampacity is at least 125% of the amperage shown in the design data section for the appropriate model. Do not connect other equipment to this circuit to prevent overloading.
- Configure Controller Settings (Optional)
If the unit is equipped with an automatic temperature controller, it is preset at the factory. For most applications, no adjustment is required. If adjustments are needed, refer to the 'Displaying and changing program settings' section of the manual for instructions on accessing and modifying parameters such as cooling/heating setpoints and differentials. Ensure the unit remains upright during operation.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.