nVent TFP102 - TFP10 Side-Mount Filter Fan Type 1, 230V 215CFM, Light Gray, Composite
nVent

TFP102

UPC: 783510413996

Documents & Media
Installation Instructions

Contact for Pricing

Overview

The **nVent TFP102 Side-Mount Filter Fan** is a high-performance, low-maintenance cooling solution engineered for industrial enclosures where space is limited but reliable thermal management is critical. Designed by nVent, a global leader in thermal management and electrical solutions, the TFP102 delivers **215 CFM of filtered airflow** at **230V (50/60Hz)** with a power consumption of **64/80W** and current draw of **0.29/0.35A**, making it ideal for enclosures requiring **Type 1 protection** against dust and debris. With a **light gray composite housing**, this fan is built to withstand harsh industrial environments while providing long-lasting performance. This **side-mount filter fan** is part of nVent’s **TFP Series**, a trusted line of cooling solutions trusted by engineers and technicians in industries such as **manufacturing, automation, telecommunications, and power distribution**. Its **maintenance-free design** ensures **50,000 hours of continuous operation** without lubrication or service, reducing downtime and operational costs. The **integrated filter** prevents contaminants from entering the enclosure while allowing clean, filtered air to circulate, protecting sensitive electronics from overheating. **Key Applications:** - **Control panels** in manufacturing plants - **Telecom cabinets** exposed to outdoor conditions - **Industrial automation enclosures** with high heat loads - **Power distribution units** requiring Type 1 ingress protection - **Harsh environment installations** where reliability is non-negotiable **Why Choose the nVent TFP102?** - **Space-saving side-mount design** fits enclosures with limited clearance - **Type 1 rated** for basic dust protection (IP54 equivalent) - **Low power consumption** (64/80W) for energy efficiency - **Long operational life** (50,000 hours) with no maintenance required - **Lightweight composite construction** resists corrosion and impact - **Easy installation** with standard mounting options nVent’s **TFP Series** is renowned for its **durability, efficiency, and ease of integration**, making it a preferred choice for engineers designing thermal management systems. Whether you’re protecting PLCs in a factory, servers in a data center, or sensors in an outdoor telecom setup, the **TFP102 ensures consistent cooling performance** without compromising enclosure integrity. Backed by nVent’s **global engineering expertise** and **industry-leading warranties**, this filter fan is a cost-effective solution for long-term thermal management in demanding applications. For professionals seeking a **reliable, low-maintenance cooling solution**, the nVent TFP102 Side-Mount Filter Fan delivers **proven performance** with the backing of a trusted manufacturer. Its **compact footprint, energy efficiency, and robust construction** make it an essential component in modern industrial and commercial enclosures.
  • Cooling Fan Package includes fan, air filter, composite air plenum, finger guard and grille
  • Exhaust Package includes air filter, filter retainer with integral finger guard and grille
  • EMC Upgrade Kit includes a grille standoff collar and a special EMC shielding grille
  • Reliable cooling for enclosures with limited space requiring simple filtered airflow for basic cooling
  • 24 VDC, 115 VAC and 230 VAC options available
  • Washable foam (Type 1) or disposable (Type 12) filter in fan
  • Dynamically-balanced fan impellers molded from polycarbonate material
  • 4-inch fan is thermally protected and uses permanently-lubricated ball bearings
  • 6- and 10-inch fans have ball bearing construction and split-capacitor motors that are thermally protected to avoid premature failure
  • Fans have lead wires for power connection with ends stripped 1/2 in. (12 mm)

Specifications

Airflow
365 m³/h
Airflow
215 ft³/min
Ambient Temperature
167 Deg F max
Ambient Temperature, Maximum
167 F
Ambient Temperature, Maximum
75 C
Amperage Rating
0.35 A
Amperage Rating
.35 A
Application
Controls and Drives;Power Distribution
Application
Power Distribution; Controls and Drives
Color
Light Gray
Color
Gray
Color
Grey
Color Code
RAL 7035
Depth
5.7 in
Depth
145 mm
Finish
Smooth Matte
Flow Rate
215 CFM max
Height
300 mm
Height
11.81 in
Material
Composite
Max Current
0.35 A
Nominal Voltage
230 V
Size
12 x 13 x 5 in
Type
Fans and Filter Fans
Voltage AC
200-250 V
Voltage Rating
200 - 250 VAC
Weight
7.8 lb
Weight
5.17 kg
Width
12.99 in
Width
330 mm
Package Dimensions (L x W x H)
13.2 IN x 12.1 IN x 6.5 IN
Package Dimensions (L x W x H)
33.528 cm x 30.734 cm x 16.51 cm
Package Weight (Imperial)
7.800 L
Package Weight (Metric)
3.538 kg
TFP10 Side-Mount Filter Fan Type 12, 230V 75CFM, Light Gray, Composite

TFP102UL12

TFP10 Side-Mount Filter Fan Type 12, 230V 75CFM, Light Gray, Composite
Roof fan - 12,75"x12,75" 230Vac - 288.2 cfm - RAL 7035 - IP54

TP19U230B541

Roof fan - 12,75"x12,75" 230Vac - 288.2 cfm - RAL 7035 - IP54
PFA 20000 Type12 Exh Ft Lt Gy

11720001055

PFA 20000 Type12 Exh Ft Lt Gy

How to Install the TFP102SS Side-Mount Filter Fan

This guide provides step-by-step instructions for installing and configuring the TFP102SS side-mount filter fan in an enclosure.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors, Grounding wire

  1. Determine fan location

    Identify the appropriate location for the fan on the vertical side of the enclosure, ensuring there is enough clearance for electrical components and airflow.

  2. Cut the enclosure

    Clear any wires and components from the area, then make the proper size cutout in the enclosure for the fan installation.

  3. Ground the fan housing

    If required, connect a grounding wire to the fan housing using the green grounding screw provided, ensuring compliance with N.E.C. standards.

  4. Mount the fan

    Secure the fan to the plenum using the supplied thread cutting screws, ensuring the airflow direction indicated on the fan housing is correct.

  5. Insert the fan package

    Place the assembled fan package into the cutout in the enclosure, ensuring the gasket is positioned between the plenum and enclosure wall.

  6. Secure the fan package

    Use the provided screws, lockwashers, and nuts to secure the fan package in place within the enclosure.

  7. Install the filter

    Insert the filter (AFLTRXXUL12) with the white fabric side facing into the enclosure and the foam side facing out.

  8. Attach the grille

    Snap the grille onto the fan package to complete the installation.

  9. Connect power

    Connect the fan lead wires to the appropriate voltage power source, ensuring all wiring complies with local codes.

  10. Verify installation

    Double-check all connections and ensure the fan operates correctly before closing the enclosure.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.