nVent T430826G108 T-Series Mid-Size Outdoor T43, 8000BTU 230V, Brushed, SS304
UPC: 783510233341
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Nominal 8,000 BTU/h cooling capacity (7,400/8,200 BTU/h)
- 230V operation with 50/60 Hz frequency
- Durable SS304 stainless steel construction for corrosion resistance
- Designed for outdoor industrial environments
- Features compressor heaters and head pressure controls for reliable operation
- Reliable mechanical thermostat on enclosure side of the unit
- Dual condenser-side air movers for performance redundancy
- Cleanable, reusable aluminum mesh filter protects coils for maximum cooling performance
- Exterior and fully recessed mounting options on many models
- Easy-mount flanges for simple installation
Specifications
Application | Power Distribution; Corrosive Environments; Controls and Drives |
Color | Unpainted |
Depth | 277 mm |
Depth | 10.9 in |
Finish | Brushed #3 |
Height | 43 in |
Height | 1,092 mm |
Material | Stainless Steel 304 |
Max Current | 5.4 A |
Model | T43 |
NEMA Rating | 4X Watertight, corrosion-resistant |
Nominal Capacity Btu/h | 8,200 Btu/h |
Nominal Capacity Watts | 2,403 W |
Nominal Voltage | 230 V |
Number Of Phases | 1 |
Operating Temperature | -40-131 |
Operating Temperature | -40-55 |
Product Family | T-Series |
Protection Rating | NEMA Type 4X |
Remote Access Control | No |
Thickness | 1.21 mm |
Thickness | 18 ga |
Type | Air Conditioners |
Voltage AC | 200-250 V |
Voltage Rating | 230 |
Weight | 57 kg |
Weight | 160 lb |
Width | 400 mm |
Width | 15.75 in |
Package Dimensions (L x W x H) | 21 IN x 14 IN x 45 IN |
Package Dimensions (L x W x H) | 53.34 cm x 35.56 cm x 114.3 cm |
Package Weight (Imperial) | 160.000 L |
Package Weight (Metric) | 72.576 kg |
T290426G002
AIR COND, T29-0426-G002, Bulletin MCL (Air Conditioners - T29-0426), Size/Dims: 2.00x2.00x2.00, Material: Steel, Finish: GrayM330416G071
AIR COND, M33-0416-G071, Bulletin MCL (Air Conditioners - M33-0416), Size/Dims: 2.00x2.00x2.00, Material: Steel, Finish: GrayT290416G102
AIR COND, T29-0416-G102, Bulletin MCL (Air Conditioners - T29-0416), Size/Dims: 2.00x2.00x2.00, Material: Steel, Finish: GrayT431016G104
AIR COND, T43-1016-G104, Bulletin MCL (Air Conditioners - T43-1016), Size/Dims: 2.00x2.00x2.00, Material: Steel, Finish: GrayFrequently Asked Questions
What is the cooling capacity of the nVent T430826G108?
The nVent T430826G108 has a nominal cooling capacity of 8,000 BTU/h, with specific performance data indicating 7,400/8,200 BTU/h.
What voltage does the nVent T430826G108 operate on?
The nVent T430826G108 operates on 230V with a frequency of 50/60 Hz.
What material is the nVent T430826G108 constructed from?
The nVent T430826G108 is constructed from SS304 stainless steel, providing excellent corrosion resistance.
Is the nVent T430826G108 suitable for outdoor use?
Yes, the nVent T430826G108 is specifically designed as an outdoor model for industrial environments.
What features ensure reliable operation in varying temperatures?
The nVent T430826G108 includes compressor heaters and head pressure controls to ensure stable cooling performance across different ambient temperatures.
How to Install the T430826G108 Air Conditioner
Installation guide for mounting and wiring the T430826G108 air conditioner into an enclosure.
Estimated time: 45m
Tools needed:
Screwdriver, Wrench, Ratchet driver
Supplies needed:
Mounting bolts, Gasket kit
- Inspect and Test the Air Conditioner
Inspect the air conditioner for any shipping damage. If the unit has been in a horizontal position, let it stand upright for at least 5 minutes before testing. Connect the power cord to a properly grounded power supply and operate for 5-10 minutes to verify functionality. Ensure no excessive noise or vibration is present. Refer to the nameplate for electrical requirements. Minimum circuit ampacity should be at least 125% of the amperage shown in the design data section for the appropriate model.
- Prepare the Enclosure
Using the cutout dimensions provided in the manual, prepare the air 'IN' and air 'OUT' openings, and the mounting bolt hole pattern for the enclosure.
- Install Gaskets
Using the provided gasket kit, install gaskets to the air conditioner according to the instructions in the 'MOUNTING GASKET KIT' section of the manual.
- Mount the Air Conditioner
Mount the air conditioner onto the enclosure using the provided mounting bolts and screws. 'EZ' mount tabs can assist in holding the unit in place. Ensure the unit remains upright during mounting and operation. Start bolts by hand before tightening with a wrench or ratchet driver to avoid cross-threading.
- Route the Drain Tube
Route the drain tube ensuring it is on a continuous downward slope to prevent kinking or elevation above the exit point. Failure to do so may result in overflowing of the condensate drain pan.
- Connect Power
Refer to the top of the nameplate for electrical requirements. Connect the power cord to a properly grounded power supply. Use of an extension cord is not recommended. The electrical circuit should be fused with a slow blow or HACR circuit breaker.
- Adjust Temperature Control
The thermostat is factory preset. To change the temperature setting, remove the nylon plug (if applicable) and use a screwdriver to adjust. Turn clockwise for cooler temperatures and counterclockwise for warmer temperatures. The set point equals the off temperature for cooling and the on temperature for heating.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.