nVent STB202008 - Terminal Box, STB, 200x200x80mm, Light Gray, Mild Steel
nVent

STB202008

UPC: 783510529451

Documents & Media
Installation Instructions

Contact for Pricing

Overview

The nVent STB Series Terminal Box (SKU: STB202008) offers robust protection for electrical components in demanding indoor industrial environments. Constructed from durable mild steel and finished in a light gray hue, this IP66-rated enclosure is engineered to safeguard sensitive equipment from the ingress of dust and water, thereby mitigating the risk of component failure and costly operational downtime. Its compact dimensions of 200x200x80mm make it a versatile solution for a wide array of applications where space is a consideration but protection is paramount. The STB range is a testament to nVent's commitment to providing reliable enclosure solutions. Each terminal box is designed for straightforward installation and maintenance, ensuring that your electrical infrastructure remains secure and functional. The IP66 rating signifies superior protection against dust and powerful water jets, making these boxes ideal for use in areas prone to washdowns or significant particulate contamination. This level of protection is critical in industries such as food and beverage processing, pharmaceuticals, manufacturing, and general industrial facilities where maintaining a clean and dry environment for electrical controls is essential. Key benefits of the nVent STB Terminal Box include: * **Superior Environmental Protection:** The IP66 rating ensures complete dust ingress protection and protection against high-pressure water jets from any direction, safeguarding internal components. * **Durable Construction:** Made from robust mild steel, these boxes are built to withstand the rigors of industrial settings, offering long-term reliability. * **Reduced Downtime:** By preventing water and dust ingress, the STB boxes significantly reduce the likelihood of electrical faults and the associated costly downtime. * **Versatile Sizing:** Available in a wide range of standard sizes, including this 200x200x80mm model, to accommodate various installation requirements. * **Ease of Installation:** Designed for efficient mounting and wiring, simplifying the setup process for electrical contractors and maintenance personnel. When selecting an enclosure for critical electrical connections, the nVent STB Series provides a dependable and cost-effective solution. Its availability off the shelf in numerous configurations means you can quickly source the right product for your project, minimizing lead times. Trust nVent, a global leader in electrical enclosure solutions, to protect your valuable equipment and ensure the continuous operation of your industrial processes. The STB202008 is an excellent choice for applications requiring a compact, yet highly protective, terminal enclosure.
  • Material: 1.2 mm mild steel.
  • Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing. Four M6 × 13 studs for bottom profiles / mounting plate fixation.
  • Gasket: Sealing is ensured by an injected one piece polyurethane gasket.
  • Earthing: M8x18 mm earthing studs in body and cover, M8 nuts, earthing washers and earthing labels.
  • Protection: IP 66, TYPE 4, 12, IK 08.
  • Finish: RAL 7035, structured powder coating.
  • Delivery: Body, cover, cover screws, fixing screws, cover plugs, and earthing facilities.

Specifications

Application
Controls and Drives;Factory Automation and Process Control
Application
Factory Automation and Process Control; Controls and Drives
Body Thickness
1.2 mm
Body Thickness
18 ga
Body Thickness
16 ga
Cable Entry
No
Color
Light Gray;RAL 7035 Light Gray
Color
Light Gray
Color Code
RAL 7035
Construction
Body: 18 gauge Door: 18 gauge
Cubic Capacity
195 in3
Depth
13 IN
Depth
3.15
Depth
80
Door Thickness
14 ga
Door Thickness
18 ga
Door Thickness
1.2 mm
Finish
Powder Coated
Height
44 IN
Height
7.87
Height
200
Insulation
No
Material
Mild Steel
Mounting
Wall Mounted
NEMA Rating
NEMA Type 4 NEMA Type 12 NEMA Type 13
NEMA Rating
4
Number Of Outlet
1
Protection Rating
NEMA Type 4
Size
7.87 x 7.87 x 3.15 inch
Type
Mild Steel Terminal and Junction Boxes
Type
Mild Steel Industrial Terminal and Junction Boxes
Weight
3.86 lb
Weight
32 lbs./100ft
Width
7.87
Width
200
Width
23 IN
Package Dimensions (L x W x H)
8.25 IN x 8.25 IN x 3.77 IN
Package Dimensions (L x W x H)
20.955 cm x 20.955 cm x 9.5758 cm
Package Weight (Imperial)
3.860 L
Package Weight (Metric)
1.751 kg
Terminal Box, STB, 200x200x120mm, Light Gray, Mild Steel

STB202012

Terminal Box, STB, 200x200x120mm, Light Gray, Mild Steel

How to Install the STB202008 Controller

This guide provides step-by-step instructions for installing and configuring the STB202008 Controller, ensuring proper wiring and setup.

Estimated time: 1h

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Wire connectors, Floor plate (if applicable)

  1. Prepare the installation area

    Ensure the installation surface is non-combustible. If mounting on or over a combustible surface, install a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel, extending at least 150 mm beyond the equipment on all sides.

  2. Mount the controller

    Secure the STB202008 Controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.

  3. Connect the wiring

    Use wire connectors to connect the power supply and input/output wires to the appropriate terminals on the controller. Refer to the wiring diagram for correct connections.

  4. Verify connections

    Use a multimeter to check the voltage at the power terminals to ensure proper power supply. Confirm that all connections are secure and correctly wired.

  5. Configure the controller

    Follow the manufacturer's instructions to program the controller settings according to your application requirements. Ensure all parameters are set correctly.

  6. Calibrate the controller

    Perform any necessary calibration procedures as outlined in the user manual to ensure accurate operation of the STB202008 Controller.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.