Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*
Overview
- Constructed from high-strength 5-mm or higher gauge steel wire
- Pre-galvanized light gray finish for corrosion resistance
- Dimensions: 6.00" x 12.00" x 120.00" straight section
- UL Classified for suitability as equipment ground conductor
- Meets NFPA 70, IEC 61537, and NEMA VE 1 standards
- Load capacity: 23 lbs./ft. per 6-ft. span
- Cat6 fill rate: 931 cables (50% fill)
- Cat6A fill rate: 855 cables (50% fill)
- T-weld top wire for enhanced structural integrity
- Sold in quantities of 4 per 10-ft. section
Specifications
Application | Networking, Storage and Data Center |
Cable Quantity, Cat 6 @75% Fill | 931 |
Color | Unpainted |
Fill Rate, Cat 6 diam. 0.19 in | 931 |
Fill Rate, Cat 6A diam. 0.23 in | 852 |
Load | 23 lb/ft |
Load Per 6 ft Span | 123 lb/ft |
Modification Services | No |
Nominal Width | 12 in |
Product Family | QuickTray Pro |
Splice Quantity | 6 |
Splice Quantity, Per Joint | 6 |
Thickness | 0.2 in |
Type | Cable Pathway |
Weight | 21.5 lb |
Weight Per Section | 27 lb |
Package Dimensions (L x W x H) | 119.75 IN x 13 IN x 13.25 IN |
Package Dimensions (L x W x H) | 304.165 cm x 33.02 cm x 33.655 cm |
Package Weight (Imperial) | 21.500 L |
Package Weight (Metric) | 9.752 kg |
How to Install and Modify QUICK TRAY PRO™ Cable Tray
This guide provides comprehensive instructions for cutting, bending, and joining QUICK TRAY PRO™ Cable Tray sections to create custom cable routing installations.
Estimated time: 2h
Tools needed:
Side action bolt cutter
Supplies needed:
QUICK TRAY PRO™ Cable Tray sections, Splice Kit (QTPBNWK/QTPBNWKBLK), Splice Washer (QTPSSW3/QTPSSW3BLK), Universal Splice Bar (QTPUS10/QTPUS10BLK), T-Connection or 90-degree Splice Bar (QTP90TKIT/QTP90TKITBLK)
- Prepare for Cutting Tray Sections
Always use the Hoffman side action bolt cutter (QTPBC) to cut QUICK TRAY PRO™ Cable Tray. This tool ensures precision cuts, minimizes sharp edges that could snag cables, and helps protect the new cut from corrosion. Before cutting, decide which wires must be removed for your desired modification (e.g., bends, junctions).
- Execute Precision Cuts on Tray Wires
When cutting, position the cutting jaws on the cradle wire and make the cut at an angle away from the new end. Start with the top side wire, then cut the remaining side wires. Turn the tray over and cut the bottom wires from the underside, ensuring each cut is clean to eliminate the need for grinding or touch-up.
- Create a 90-Degree Bend
At the desired bend location, cut all the side wires for the specific tray width as indicated in the cutting patterns. Turn the tray on the uncut side and smoothly bend it until the inside edges closest to the uncut side meet. Secure the bend using QTPBNWK/QTPBNWKBLK Splice Kits and QTPSSW3/QTPSSW3BLK Splice Washers at the indicated locations for the tray width.
- Form a Large Radius Bend
Remove the wires from the outside and the bottom of every other mesh section at the bend location, following the specific cutting pattern for your tray size. Lay the tray on a flat surface and pull the ends on the uncut side towards each other until the remaining cut sides almost touch at the corners. Fasten the inside of the bends together using appropriate hardware (Splice Kits and Splice Washers) as shown in the diagrams.
- Construct an Elbow Connection
To create an elbow, cut the side wires from each tray section according to the cutting pattern for the tray width and desired angle. Align the wires of the two trays at the desired angle. Fasten the joint using two QTPBNWK/QTPBNWKBLK Splice Kits and QTPSSW3/QTPSSW3BLK Splice Washers for each joint. For adjustable angles, use one Splice Kit and one Splice Washer, centered over two tray bottom wires.
- Assemble a 90-Degree Tee
For a 90-degree tee, cut the side wires from the tray section forming the top of the tee as shown in the cutting guide for your tray size. Align the wires of the two trays at the desired angle. Fasten the tray using two QTPBNWK/QTPBNWKBLK Splice Kits and QTPSSW3/QTPSSW3BLK Splice Washers for each joint. Utilize a QTP90TKIT/QTP90TKITBLK T-Connection or 90-degree Splice Bar for additional support.
- Install Cable Tray Supports
Install straight section supports at typical 6-foot (1.5m) centers. Ensure supports are placed within 24 inches (610mm) of any splice on straight sections. The span between supports should not exceed the length of the tray. Provide additional supports around bends and wherever the cable tray level changes to ensure stability and proper load distribution.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.