nVent PGPV85 ProLine Gland Plates, fits 800x500mm, Painted Filtered
UPC: 783510146917
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Solid Gland Plate and EMC Gland Plate are accessories to 100- mm Solid Base, 100-mm/200-mm Plinth Base, Mobile Base and Transportation Base. These gland plates can be used without a base if casters, levelers or frame feet are installed.
- Solid Gland Plate: the Solid Gland Plate can be used with all ProLine subpanels or rack angles. The gland plate consists of a base mounting surface and two adjustable foam-gasketed plates that permit cable entry. The plate can be rotated 180 degrees for f
- EMC Gland Plate: This gland plate can be used with subpanels or rack angles. Gland plate consists of a base mounting surface and two adjustable gland plates (both have a conductive coating) with conductive fabric-over-foam gasket for cable entry.
- Filtered (Vented) Gland Plate: Filtered Gland Plate is used only in conjunction with Vented Plinth Base Covers. The plate can be used with all ProLine subpanels or rack angles. It consists of a mounting base, three adjustable plates for cable entry, a fil
- All hardware included
Specifications
Application | Power Distribution; Controls and Drives |
Color | Light Gray |
Color | Light Grey |
Color Code | RAL 7035 |
Finish | Powder Coated |
Fits Frame Depth | 500 mm |
Fits Frame Width | 800 mm |
Ip Rating | IP12 |
Material | Mild Steel |
Modification Services | Yes |
Mounting Type | Front or Rear Cable Entry |
Nema Rating | NEMA 12 |
Product Family | ProLine |
Series | ProLine |
Size | fits 800x500mm |
Size | 800x500mm |
Thickness | 14 ga |
Thickness | 1.9 mm |
Type | Filtered |
Weight | 19 lb |
Package Dimensions (L x W x H) | 32 IN x 20 IN x 2 IN |
Package Dimensions (L x W x H) | 81.28 cm x 50.8 cm x 5.08 cm |
Package Weight (Imperial) | 19.000 L |
Package Weight (Metric) | 8.618 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
How to Install the PGPV85 PROLINE™ Enclosure
Installation guide for mounting and wiring the PGPV85 PROLINE™ enclosure.
Estimated time: 1h
Tools needed:
Measuring tape, Level, Drill, Screwdriver, Wire strippers, Wire crimpers, Multimeter
Supplies needed:
Mounting hardware (screws, anchors), Wire connectors, Grounding lug, Gasket material (if applicable)
- Select Mounting Location
Choose a suitable location for the enclosure. Ensure the mounting surface is strong enough to support the weight of the enclosure and its contents. Consider environmental factors such as temperature, humidity, and potential exposure to corrosive elements. Verify that there is adequate space for installation and future maintenance.
- Prepare the Enclosure
If necessary, install any internal mounting panels, rack rails, or other accessories according to their specific instructions. Ensure all gaskets are properly seated to maintain the enclosure's environmental rating. If knockouts are present, select the appropriate size and location for cable entry and exit.
- Mount the Enclosure
Using a measuring tape and level, mark the mounting hole locations on the wall or mounting surface. Drill pilot holes and install appropriate anchors if required. Securely mount the enclosure to the surface using the provided mounting hardware. Verify that the enclosure is plumb and level.
- Install Internal Components
Mount any internal components such as circuit breakers, terminal blocks, or control devices within the enclosure. Follow the manufacturer's instructions for each component. Ensure proper spacing and grounding for all installed equipment.
- Wire the Enclosure
Route power and signal cables through the appropriate knockouts or conduit entries. Strip wire ends to the correct length and connect them to the designated terminals using appropriate connectors. Ensure all connections are secure and properly insulated. Install a grounding conductor from the enclosure to a suitable ground point.
- Verify Wiring and Connections
Before applying power, double-check all wiring connections for correctness and security. Use a multimeter to verify continuity and check for any short circuits or open circuits. Ensure that all connections match the wiring diagram.
- Finalize Installation
Close and secure the enclosure door. If applicable, install any external accessories such as handles or locks. Clean the enclosure and surrounding area.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.