nVent PF1050 Front/Rear Plinths, PF, 100x498x63mm, Umbra Gray, Zinc Plated, Mild Steel
UPC: 783510525637
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Description: Front and rear plinth sections. For cabling without any restrictions and in accordance with the VDE 0113 standard. The plinth consists of four corner pieces with removable front covers. The side panels PS are to be ordered separately. Produce
- Material: Corner pieces in 2 mm and panels in 1.5 mm mild steel.
- Finish: RAL 7022 structured powder coating.
- Pack quantity: 1 set of 4 corner pieces including covers. Front and rear panel (2 rear panels for 200 mm high plinths) with mounting accessories. Mounting accessories for side panels PS or transversal profiles PCP.
- Mounting requirements: Add the side panels PS for a complete plinth. When combining enclosures it is recommended to add transversal panels PCP for cable duct support and extra rigidity.
- Benefit: the plinth allows enclosures to be fixed to the floor without the need for interior access
- Comment: the front and rear plinth PF, must be mounted along with side panels PS; if creating an enclosure system with multiple enclosures, the side panels are required to be mounted at the beginning and end only
- Comment: to reinforce the combined plinths, plinth combining profiles PCP/PCPK, should be used
- Mounting requirements: add the side panels PS for a complete plinth; when combining enclosures, it is recommended to add transversal panels PCP for cable duct support and extra rigidity
Specifications
Application | Power Distribution; Controls and Drives; Factory Automation and Process Control |
Application | Controls and Drives;Factory Automation and Process Control;Power Distribution |
Application | Controls and Drives; Factory Automation and Process Control |
Color | RAL 7022 Umbra Gray |
Color | Gray |
Color | Grey |
Color | Umbra Gray |
Color Code | RAL 7022 |
Consist of | Front/Rear Plinths;Mounting Components and Instruction Manual |
Consist of | Front/Rear Plinths; Mounting Components and Instruction Manual |
Construction | 16 gauge |
Depth | 63 mm |
Depth | 2.46 in |
Enclosure Material | Mild Steel |
Finish | Powder Coated |
Finish | Powder Coating |
Height | 100 mm |
Height | 3.94 in |
Material | Mild Steel |
Material | Mild Steel, Zinc Plated |
Package Quantity | 1 |
Product Family | Free-Standing |
Series | PF |
Size | 100x498x63mm |
Size | 3.94 x 19.61 x 2.46 inch |
Thickness | 16 ga |
Thickness | 51.40mm (2.024") |
Thickness | 1.5 mm |
Type | IEC Enclosure Accessories |
Type | Fixing |
Weight | 8.1 lb |
Weight | 3.7 kg |
Weight | 32 lbs./100ft |
Width | 19.69 in |
Width | 19.61 in |
Width | 500 mm |
Works With | IEC |
Package Dimensions (L x W x H) | 20.06 IN x 4.31 IN x 20.31 IN |
Package Dimensions (L x W x H) | 50.9524 cm x 10.9474 cm x 51.5874 cm |
Package Weight (Imperial) | 8.100 L |
Package Weight (Metric) | 3.674 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
Frequently Asked Questions
What are the dimensions of the PF1050 plinth?
The PF1050 plinth has dimensions of 3.94 inches in height, 19.69 inches in width, and 2.46 inches in depth.
What material is the PF1050 plinth made from?
The PF1050 plinth is constructed from mild steel, with corner pieces being 2 mm thick and panels 1.5 mm thick.
What is the finish and color of the PF1050 plinth?
The plinth has a RAL 7022 structured powder coating in Umbra Gray.
How does the plinth facilitate cabling?
The plinth creates extra space underneath the enclosure, allowing for cabling without restrictions in accordance with the VDE 0113 standard.
What components are included in a PF1050 plinth package?
A package includes four corner pieces with removable covers and mounting accessories for side panels or transversal profiles.
Are side panels included with the PF1050 plinth?
No, the side panels (PS) must be ordered separately to complete the plinth.
What is the weight of the PF1050 plinth?
The PF1050 plinth weighs 8.1 lb.
What is the thickness of the plinth panels and corner pieces?
The corner pieces are 2 mm thick, and the panels are 1.5 mm thick (16ga).
What is the color code for the PF1050 plinth?
The color code for the Umbra Gray finish is RAL 7022.
How should plinths be configured for wide enclosures?
For enclosures 1600 mm wide, use two 800 mm wide plinths.
How to Install PF/PV/PS Series Components
This guide outlines the fastening procedures for various components within the PF/PV/PS series, detailing torque specifications for secure assembly.
Estimated time: 30m
Tools needed:
SW19 wrench, SW8 wrench, T40 Torx wrench, Torque wrench
Supplies needed:
M12 bolts, M8x16 bolts, PF/PV/PS components
- Fasten M12 Connections (Type A)
Identify all connection points labeled 'A' in the assembly diagrams. Using an SW19 wrench and a torque wrench, secure these connections with M12 bolts (including M12x20 if applicable). Apply a torque of 15-20 Nm to ensure a firm and secure attachment.
- Fasten M8x16 Connections (Type B)
Locate all connection points labeled 'B' in the assembly diagrams. Using an SW8 wrench and a torque wrench, secure these connections with M8x16 bolts. Apply a torque of 10-15 Nm to ensure proper fastening.
- Verify All Fastenings
After completing all fastening steps, visually inspect all secured connections. Ensure that all bolts are tight and that the specified torque values have been applied correctly. Confirm that no components are loose or improperly seated.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.