nVent P2KOD2085E ProLine G2 Industrial Packages Type 12 E-Cnfg 2Dr, 2000x800x500, Lt Gray, Steel
UPC: 783510323189
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 12-gauge (2.5 mm) roll-formed steel with welded corners, and hybrid frame profile for superior performance under load
- Frame features a 25-mm DIN standard, alternating rectangular and round hole pattern
- Enclosures with a width of 1200mm or less have a single-piece rear cover, and can accommodate a fully-recessed mounting subpanel; enclosures with a width of greater than 1200mm have two rear covers that affix to a removable center upright/vertical combina
- Gasket is seamless polyurethane providing a water-tight, dust-tight seal against moisture and contaminants; UL component recognized, CSA compliant
- Door bar system present on all doors (including window doors)
- Single/primary door includes Smooth Glide Latching System, 3-point roller latch system with timed latch engagement, for enclosures greater than or equal to 1000 mm in height; system ensures a solid and repeatable seal with a low closure force
- 2-door enclosures include overlapping double doors to provide full-width open front, with a secondary door that latches with two levers
- Reversible hinging on single doors (default left hinge), and on overlapping double doors (default right door primary door)
- Two grounding studs present on each door
- Low-Profile Flush Swing Handle with key lock on standard versions; double bit lock on 'E' versions; other handle options available (sold separately)
Specifications
Application | Power Distribution; Controls and Drives |
Color | Light Gray |
Color | Lt Gray |
Color Code | RAL 7035 |
Depth | 505 |
Depth | 505 mm |
Depth | 19.88 in |
Door Quantity | 2-2 |
Door Quantity | 2 |
Finish | Powder Coated |
Height | 2,002 mm |
Height | 2,002 |
Height | 78.82 in |
Material | Steel |
Material | Mild Steel |
Max Rack Mount Unit | 42 |
Max Subpanel Size | 75.0 x 28.7 in |
Max Subpanel Size | 1906 x 728 mm |
Nema Rating | Type 12 |
Product Family | ProLine |
Series | ProLine G2 |
Series | ProLine G2 Industrial Packages |
Size | 2000x800x500 |
Size | 2000x800x500 mm |
Type | Mild Steel Modular Industrial Enclosures |
Width | 31.8 in |
Width | 808 mm |
Width | 808 |
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
Frequently Asked Questions
What are the key features of the ProLine G2 enclosure?
The ProLine G2 has a 15% higher load rating than competitors, can hold over 45% more weight on subpanels, and offers more than 400 standard industrial packages. It features a modular design with customizable components for various industrial applications.
What mounting options are available for internal components?
Multiple mounting options include full subpanels, partial subpanels, swing-out subpanels, side-mount subpanels, grid straps, 19-inch rack angles, and adjustable rack-mounting rails.
What types of environmental ratings are available?
The ProLine G2 offers Type 12 and Type 3R environmental ratings. Customers can select different door types, tops, and base options to meet specific environmental protection requirements.
What cable management solutions are provided?
Cable management options include cable entry cabinets, top mounting modules, vertical tie-down cable managers, basket trays, power strip brackets, and various cable management accessories like D-rings and VELCRO cable wraps.
What safety features are included in the enclosure design?
Safety features include mechanical and electrical interlocks, barrier panels, Sequestr external disconnect packages to mitigate arc flash, and optional tamperproof hardware to limit unauthorized access.
How to Install the P2KOD2085E PROLINE G2 Enclosure
Installation guide for mounting and wiring the P2KOD2085E PROLINE G2 enclosure. Refer to the nameplate or datasheet for specific ratings, dimensions, and other model-specific values.
Estimated time: 1h
Tools needed:
Measuring tape, Level, Drill, Screwdriver, Wrench set, Wire strippers, Wire crimpers, Multimeter
Supplies needed:
Mounting hardware (screws, bolts, nuts), Wire connectors, Grounding lug, Sealing tape (if applicable)
- Prepare the Mounting Location
Select a suitable location for the enclosure. Ensure the mounting surface is level and capable of supporting the weight of the enclosure and its contents. Check the nameplate or datasheet for specific mounting requirements and environmental considerations.
- Mount the Enclosure
Using the provided mounting holes or brackets, securely fasten the P2KOD2085E enclosure to the prepared surface. Use appropriate mounting hardware for the surface type and the weight of the enclosure. Verify the enclosure is plumb and level.
- Install Internal Components (if applicable)
If the enclosure is being populated with internal components, install them according to their respective instructions. Ensure all components are securely mounted and properly spaced. Refer to the enclosure's layout diagram if provided.
- Ground the Enclosure
Connect the grounding conductor to the designated grounding point on the enclosure using a grounding lug and appropriate hardware. Ensure a secure and low-resistance connection. Refer to local electrical codes for grounding requirements.
- Wire the Enclosure
Route all power and signal wiring into the enclosure through the designated conduit entries or cable glands. Strip wire ends as needed and connect them to the appropriate terminals or devices within the enclosure using wire connectors or crimps. Double-check all connections against the wiring diagram. Ensure compliance with all applicable electrical codes and standards. Verify wire sizes and types are appropriate for the intended application by checking the nameplate or datasheet.
- Seal Entries and Gaps
If required for environmental protection (e.g., NEMA or IP rating), ensure all conduit entries, cable glands, and panel seams are properly sealed using appropriate sealing tape or gaskets to prevent the ingress of dust or moisture.
- Final Inspection and Testing
Perform a thorough visual inspection of all installations and connections. Use a multimeter to verify electrical continuity and insulation resistance as required. Ensure all doors and latches are functioning correctly. Consult the nameplate or datasheet for any specific post-installation tests or checks.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.