nVent P2KOD18128E ProLine G2 Industrial Packages Type 12 E-Cnfg 2Dr, 1800x1200x800, Lt Gray, Steel
UPC: 783510322557
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 12-gauge (2.5 mm) roll-formed steel with welded corners, and hybrid frame profile for superior performance under load
- Frame features a 25-mm DIN standard, alternating rectangular and round hole pattern
- Enclosures with a width of 1200mm or less have a single-piece rear cover, and can accommodate a fully-recessed mounting subpanel; enclosures with a width of greater than 1200mm have two rear covers that affix to a removable center upright/vertical combina
- Gasket is seamless polyurethane providing a water-tight, dust-tight seal against moisture and contaminants; UL component recognized, CSA compliant
- Door bar system present on all doors (including window doors)
- Single/primary door includes Smooth Glide Latching System, 3-point roller latch system with timed latch engagement, for enclosures greater than or equal to 1000 mm in height; system ensures a solid and repeatable seal with a low closure force
- 2-door enclosures include overlapping double doors to provide full-width open front, with a secondary door that latches with two levers
- Reversible hinging on single doors (default left hinge), and on overlapping double doors (default right door primary door)
- Two grounding studs present on each door
- Low-Profile Flush Swing Handle with key lock on standard versions; double bit lock on 'E' versions; other handle options available (sold separately)
Specifications
Application | Controls and Drives; Power Distribution |
Color | Light Gray |
Color | Lt Gray |
Color Code | RAL 7035 |
Depth | 31.69 in |
Depth | 805 mm |
Depth | 805 |
Door Quantity | 2 |
Door Quantity | 2-2 |
Finish | Powder Coated |
Height | 1,802 mm |
Height | 1,802 |
Height | 70.94 in |
Material | Steel |
Material | Mild Steel |
Max Rack Mount Unit | 38 |
Max Subpanel Size | 67.2 x 44.4 in |
Max Subpanel Size | 1706 x 1128 mm |
Nema Rating | Type 12 |
Product Family | ProLine |
Series | ProLine G2 Industrial Packages |
Size | 1800x1200x800 |
Type | Mild Steel Modular Industrial Enclosures |
Width | 1,208 |
Width | 1,208 mm |
Width | 47.54 in |
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What is the load rating of the ProLine G2 frame?
The ProLine G2 frame has a 15% higher load rating than the competition.
What are the available frame dimensions?
Frame heights range from 600 mm to 2200 mm, with various widths and depths available.
What accessories are available for cable management?
Cable management accessories include cable entry cabinets, tie-down brackets, and wire management rails.
What types of doors are available for the enclosure?
Available door types include solid doors, window doors, perforated doors, and overlapping double doors.
What materials are used in the ProLine G2 frame?
The frame is made of 12 gauge (2.5 mm) roll-formed steel with fully welded solid steel corner blocks.
What types of applications does ProLine G2 support?
ProLine G2 is designed for industrial environments and can accommodate Type 3R and Seismic applications.
What safety features are included with ProLine G2?
Safety features include mechanical and electrical interlocks, disconnect doors, and barrier panels.
What is the purpose of the EMC options?
EMC options are designed to maintain electromagnetic compatibility for sensitive electronic equipment.
What is the maximum load capacity for casters?
Casters can support a maximum load of 1000 lb (453.6 kg) when installed properly.
What is the purpose of the internal barrier panel?
The internal barrier panel separates the enclosure into multiple bays and is used in partial door solutions.
How to Install the P2KOD18128E PROLINE G2 Enclosure
Installation guide for mounting and wiring the P2KOD18128E PROLINE G2 enclosure.
Estimated time: 1h
Tools needed:
Drill, Level, Measuring tape, Pliers, Screwdriver, Wire strippers
Supplies needed:
Mounting hardware, Wire connectors, Grounding lug, Gasket
- Prepare the enclosure
Unpack the P2KOD18128E PROLINE G2 enclosure and inspect for any damage. Ensure all components are present. Install the gasket around the door opening according to the gasket instructions.
- Mount the enclosure
Determine the mounting location. Use a level and measuring tape to mark the mounting hole positions. Drill pilot holes if necessary. Secure the enclosure using appropriate mounting hardware. Refer to the datasheet for specific mounting instructions and load ratings.
- Install internal components
Install any internal mounting plates, subpanels, or component brackets as required. Ensure all components are securely fastened. Refer to the enclosure's specific configuration for component placement.
- Wire the enclosure
Plan the wire routing. Install wire management accessories such as cable ties or clamps. Connect power and control wiring according to the electrical schematics. Ensure all connections are tight and properly insulated. Use appropriate wire connectors and grounding lugs. Verify wire sizes and types against the nameplate or datasheet.
- Ground the enclosure
Connect the grounding conductor to the enclosure's grounding stud using a grounding lug. Ensure a secure and low-resistance connection. Refer to local electrical codes for grounding requirements.
- Final checks and door closure
Double-check all wiring connections for security and correctness. Ensure no tools or debris are left inside the enclosure. Close and latch the enclosure door securely. Verify the door is properly sealed by the gasket.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.