nVent P2K2266E ProLine G2 Industrial Packages Type 12 E-Cnfg, 2200x600x600, Lt Gray, Steel
UPC: 783510320751
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 12-gauge (2.5 mm) roll-formed steel with welded corners, and hybrid frame profile for superior performance under load
- Frame features a 25-mm DIN standard, alternating rectangular and round hole pattern
- Enclosures with a width of 1200mm or less have a single-piece rear cover, and can accommodate a fully-recessed mounting subpanel; enclosures with a width of greater than 1200mm have two rear covers that affix to a removable center upright/vertical combina
- Gasket is seamless polyurethane providing a water-tight, dust-tight seal against moisture and contaminants; UL component recognized, CSA compliant
- Door bar system present on all doors (including window doors)
- Single/primary door includes Smooth Glide Latching System, 3-point roller latch system with timed latch engagement, for enclosures greater than or equal to 1000 mm in height; system ensures a solid and repeatable seal with a low closure force
- 2-door enclosures include overlapping double doors to provide full-width open front, with a secondary door that latches with two levers
- Reversible hinging on single doors (default left hinge), and on overlapping double doors (default right door primary door)
- Two grounding studs present on each door
- Low-Profile Flush Swing Handle with key lock on standard versions; double bit lock on 'E' versions; other handle options available (sold separately)
Specifications
Application | Power Distribution; Controls and Drives |
Color | Light Gray |
Color Code | RAL 7035 |
Depth | 23.82 |
Depth | 605 |
Door Quantity | 1 |
Finish | Powder Coated |
Height | 86.69 |
Height | 2,202 |
Material | Mild Steel |
Material | Steel |
Max Rack Mount Unit | 47 |
Max Subpanel Size | 2106 x 528 mm |
Max Subpanel Size | 82.9 x 20.8 in |
Nema Rating | Type 12 |
Product Family | ProLine |
Series | ProLine G2 |
Size | 2200x600x600 mm |
Type | Mild Steel Modular Industrial Enclosures |
Weight | 255 lb |
Width | 23.92 |
Width | 608 |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What are the key features of the ProLine G2 enclosure?
The ProLine G2 has a 15% higher load rating than competitors, can hold over 45% more weight on the subpanel, and offers more than 400 standard industrial packages. It features a comprehensive set of standard components for creating custom enclosure solutions.
What enclosure frame sizes are available?
Frame heights range from 600mm to 2200mm. Widths range from 400mm to 1200mm. Depths range from 400mm to 1800mm, with various combinations available depending on the specific height.
What mounting options are available for internal components?
Multiple mounting solutions include full subpanels, partial subpanels, swing-out subpanels, side-mount subpanels, grid straps, 19-inch rack angles, and adjustable rack-mounting rails.
What environmental ratings are supported?
The ProLine G2 supports Type 12 and Type 3R ratings. EMC frame options are also available for electromagnetic compatibility requirements.
What cable management solutions are offered?
Cable management options include cable entry cabinets, top mounting modules, vertical tie-down cable managers, basket trays, power strip brackets, and various cable management accessories like D-rings and VELCRO cable wraps.
How to Install the P2K2266E PROLINE G2 Enclosure
Installation guide for mounting and wiring the P2K2266E PROLINE G2 enclosure.
Estimated time: 1h
Tools needed:
Measuring tape, Level, Drill, Screwdriver, Wire strippers, Wire crimpers, Multimeter
Supplies needed:
Mounting hardware (screws, anchors), Wire connectors, Grounding lug, Grounding wire
- Prepare the Mounting Location
Select a suitable location for the enclosure. Ensure the mounting surface is level and capable of supporting the weight of the enclosure and its contents. Use a measuring tape to mark the desired mounting points.
- Mount the Enclosure
Drill pilot holes at the marked locations. Secure the P2K2266E enclosure to the mounting surface using appropriate mounting hardware. Verify that the enclosure is securely fastened and level.
- Install Internal Components (if applicable)
If mounting internal components such as backplates or subpanels, follow their specific installation instructions. Ensure all components are securely fastened within the enclosure.
- Ground the Enclosure
Connect a grounding wire from the enclosure's grounding point to a suitable earth ground. Use a grounding lug and appropriate wire connectors. Verify the integrity of the ground connection with a multimeter.
- Wire Internal Devices
Route and connect wiring for any internal devices according to their respective diagrams and local electrical codes. Use wire strippers and crimpers as needed. Ensure all connections are secure and properly insulated.
- Final Inspection
Perform a thorough inspection of all wiring and mounting. Ensure all covers and doors are properly secured. Verify that no tools or debris are left inside the enclosure.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.