nVent P2K1846E ProLine G2 Industrial Packages Type 12 E-Cnfg, 1800x400x600, Lt Gray, Steel
UPC: 783510320010
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 12-gauge (2.5 mm) roll-formed steel with welded corners, and hybrid frame profile for superior performance under load
- Frame features a 25-mm DIN standard, alternating rectangular and round hole pattern
- Enclosures with a width of 1200mm or less have a single-piece rear cover, and can accommodate a fully-recessed mounting subpanel; enclosures with a width of greater than 1200mm have two rear covers that affix to a removable center upright/vertical combina
- Gasket is seamless polyurethane providing a water-tight, dust-tight seal against moisture and contaminants; UL component recognized, CSA compliant
- Door bar system present on all doors (including window doors)
- Single/primary door includes Smooth Glide Latching System, 3-point roller latch system with timed latch engagement, for enclosures greater than or equal to 1000 mm in height; system ensures a solid and repeatable seal with a low closure force
- 2-door enclosures include overlapping double doors to provide full-width open front, with a secondary door that latches with two levers
- Reversible hinging on single doors (default left hinge), and on overlapping double doors (default right door primary door)
- Two grounding studs present on each door
- Low-Profile Flush Swing Handle with key lock on standard versions; double bit lock on 'E' versions; other handle options available (sold separately)
Specifications
Application | Controls and Drives;Power Distribution |
Application | Controls and Drives; Power Distribution |
Color | Light Gray |
Color | Gray |
Color | Grey |
Color | Lt Gray |
Color Code | RAL 7035 |
Depth | 23.82 in |
Depth | 605 mm |
Depth | 605 |
Door Quantity | 1 |
Door Quantity | 1-1 |
Finish | Powder Coated |
Finish | Powder Coating |
Height | 1,802 mm |
Height | 70.94 in |
Height | 1,802 |
Material | Steel |
Material | Mild Steel |
Max Rack Mount Unit | 38 |
Max Subpanel Size | 1706 x 328 mm |
Max Subpanel Size | 67.2 x 12.9 in |
Max Subpanel Size | 23.03 x 44.49 in |
Nema Rating | Type 12 |
Product Family | ProLine |
Series | ProLine G2 Industrial Packages |
Size | 1800x400x600 |
Type | Mild Steel Modular Industrial Enclosures |
Width | 408 |
Width | 16.05 in |
Width | 408 mm |
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What frame sizes are available for ProLine G2?
Frame heights range from 600 mm to 2200 mm, with various widths and depths.
What materials are used in the ProLine G2 frame?
The frame is made of 12 gauge (2.5 mm) roll-formed steel.
How can I contact nVent for configuration help?
You can contact nVent via email at [email protected] or call 763 422 2211.
What is the load rating of the ProLine G2 frame?
The ProLine G2 frame has a 15% higher load rating than the competition.
What type ratings are available for the ProLine G2?
The ProLine G2 is available in Type 12 and Type 3R ratings.
What is the maximum load capacity for mobile bases?
The mobile base can support a load-bearing capacity of 1000 lb (453.6 kg).
Can I customize the ProLine G2 enclosure?
Yes, the ProLine G2 can be customized using a comprehensive set of standard components and accessories.
What is the maximum weight the subpanel can hold?
The subpanel can hold greater than 45% more weight than previous models.
What safety features are included with the ProLine G2?
Safety features include mechanical and electrical interlocks, and optional disconnect doors.
What options are available for cable management?
Options include cable entry cabinets, vertical tie-downs, and various cable management accessories.
How to Install the P2K1846E PROLINE G2
Installation guide for mounting the P2K1846E PROLINE G2 enclosure.
Estimated time: 30m
Tools needed:
Measuring tape, Level, Drill, Screwdriver
Supplies needed:
Mounting hardware, Gasket (if applicable)
- Determine Mounting Location
Select a suitable location for the PROLINE G2 enclosure. Ensure the mounting surface is level and can support the weight of the enclosure and its contents. Refer to the datasheet for specific environmental and clearance requirements.
- Prepare Mounting Surface
If mounting to a wall, mark the desired mounting points using a measuring tape and level. Drill pilot holes as required for your chosen mounting hardware. If mounting to a floor stand or other base, follow the specific instructions for that accessory.
- Mount the Enclosure
Position the PROLINE G2 enclosure against the prepared mounting surface. Secure the enclosure using appropriate mounting hardware. Ensure the enclosure is firmly attached and level.
- Install Gasket (if applicable)
If your enclosure came with a gasket, ensure it is properly installed in the channel to maintain environmental protection. Refer to the enclosure's specific documentation for gasket installation details.
- Final Checks
Verify that the enclosure is securely mounted and all doors and latches operate correctly. Ensure no tools or debris are left inside the enclosure.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.