Authorized nVent Distributor
nVent P2BP166 - ProLine G2 100mm Plinth Base, fits 600x600mm, Black, Steel

nVent P2BP166 ProLine G2 100mm Plinth Base, fits 600x600mm, Black, Steel

UPC: 783510310936

Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

Enhance your industrial enclosure installations with the nVent ProLine G2 100mm Plinth Base (SKU: P2BP166). Designed to seamlessly integrate with 600x600mm ProLine G2 enclosures, this robust plinth base elevates your equipment, providing critical space for efficient cable management and entry from below. Crafted from durable black steel, it offers superior structural support and protection against environmental factors, ensuring the longevity and reliability of your sensitive electrical and electronic components. The ProLine G2 Plinth Base is an essential accessory for any professional seeking to optimize their enclosure setup. Its primary function is to create a raised platform, effectively lifting the enclosure off the floor. This elevation is crucial for several reasons, most notably to facilitate the organized and secure routing of power, data, and control cables. By allowing cables to enter from the underside, the plinth base minimizes clutter within the enclosure, improves airflow, and simplifies maintenance procedures. This organized approach is vital in demanding industrial environments where downtime is costly and operational efficiency is paramount. Key benefits of incorporating the nVent ProLine G2 Plinth Base include: * **Superior Cable Management:** Provides ample space for cable entry and termination, preventing kinks and damage. * **Enhanced Protection:** Lifts the enclosure away from potential floor-level hazards such as dust, moisture, and accidental impacts. * **Improved Airflow:** Facilitates better ventilation by allowing air circulation beneath the enclosure. * **Simplified Installation & Maintenance:** Offers easier access for wiring and subsequent servicing. * **Robust Construction:** Manufactured from high-quality steel for exceptional durability and load-bearing capacity. This 100mm plinth base is specifically engineered for nVent's ProLine G2 enclosure series, ensuring a perfect fit and secure mounting. The black powder-coated finish not only provides an aesthetically pleasing appearance but also adds an extra layer of corrosion resistance, making it suitable for a wide range of applications across various industries, including manufacturing, automation, telecommunications, and utility sectors. Trust nVent, a global leader in electrical enclosure solutions, to provide the quality and reliability your critical infrastructure demands. The P2BP166 is a testament to their commitment to innovation and practical design, offering a straightforward yet highly effective solution for elevating and protecting your valuable equipment.
  • Four access panels for cable management options at the base of the enclosure
  • Sturdy cast aluminum corner supports for superior performance under load
  • Corner blocks can be installed onto the base of the frame independent of the cover plates, enabling the cover plates to be attached after integration and just prior to shipment
  • Stackable up to 400mm in height using Plinth Base Stacking Kit (not included)
  • 100 mm or 200 mm options
  • To maintain a NEMA Type 12 environmental rating, gland plate must also be used in the base of the enclosure
  • Installation hardware included
  • Cover plates are 16-gauge (1.5 mm) steel

Specifications

Application
Power Distribution; Controls and Drives
Color
Jet Black
Color
Black
Color Code
RAL 9005
Depth
22.21
Depth
564
Finish
Powder Coated
Fits Frame
600X600 mm
Height
3.94
Height
100
Material
Steel
Material
Mild Steel
Product Family
ProLine
Series
ProLine G2
Size
600x600mm
Thickness
1.52 mm
Thickness
16 ga
Type
100mm
Weight
15 lb
Width
23.58
Width
599
Package Dimensions (L x W x H)
49.5 IN x 8 IN x 7.5 IN
Package Dimensions (L x W x H)
125.73 cm x 20.32 cm x 19.05 cm
Package Weight (Imperial)
15.000 L
Package Weight (Metric)
6.804 kg
Panel 6.9 x 4.9 - Fits Encl. 8 x 6 - Alum

14A0705

Panel 6.9 x 4.9 - Fits Encl. 8 x 6 - Alum
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.

BX4

Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
Locking using CASTELL K key operated lock (not supplied) Fuserbloc Sirco

36297702

Locking using CASTELL K key operated lock (not supplied) Fuserbloc Sirco
External operation handle 0-1 type S01 Red Nema 4,4x

140E2911

External operation handle 0-1 type S01 Red Nema 4,4x
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey

LT20D-NEW

1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey

LN43DA

1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black

LH38

Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
EP-RJG-M20-BL-A

1SNG618003R0000

EP-RJG-M20-BL-A
5,90" x 5,90" filter fan - 24Vdc - 20.6 cfm - RAL 9005 - Type 3R - IP55

FF12D24NN53

5,90" x 5,90" filter fan - 24Vdc - 20.6 cfm - RAL 9005 - Type 3R - IP55
12,80" x 12,80" filter fan - 115Vac - 285.3 cfm - RAL 7035 - Type 12

FF20A115UE1

12,80" x 12,80" filter fan - 115Vac - 285.3 cfm - RAL 7035 - Type 12

How to Install the P2BP166 ProLine G2 Enclosure

Installation guide for mounting and wiring the P2BP166 ProLine G2 enclosure.

Estimated time: 1h

Tools needed:

Screwdriver, Drill, Level, Measuring tape, Wire strippers, Pliers, Multimeter

Supplies needed:

Mounting hardware, Wire connectors, Gasket material (if needed)

  1. Prepare the Mounting Location

    Select a suitable location for the enclosure. Ensure the mounting surface is level and can support the weight of the enclosure and its contents. Check the nameplate or datasheet for specific environmental requirements and load-bearing capacity.

  2. Mount the Enclosure

    Using a level and measuring tape, mark the mounting hole locations on the prepared surface. Drill pilot holes if necessary. Secure the P2BP166 enclosure to the mounting surface using appropriate mounting hardware. Ensure the enclosure is firmly attached and plumb.

  3. Prepare for Wiring

    Open the enclosure door. Identify the designated wiring entry points. If knockouts are present, remove them using a suitable tool. Install appropriate conduit fittings if required. Refer to the nameplate or datasheet for any specific wiring requirements or limitations.

  4. Install Internal Components (if applicable)

    If the enclosure is to house internal components such as back panels, mounting plates, or equipment, install them now according to their respective instructions. Ensure all components are securely fastened.

  5. Perform Wiring Connections

    Route the necessary power and control wiring into the enclosure through the prepared entry points. Connect the wires to the appropriate terminals or equipment inside the enclosure, following the wiring diagram provided with the internal components or in the datasheet. Use appropriate wire connectors and ensure all connections are secure and properly insulated. Verify wire gauge and type suitability based on the nameplate or datasheet.

  6. Verify Wiring and Grounding

    Double-check all wiring connections for correctness and tightness. Ensure proper grounding of the enclosure and all internal metallic components according to electrical codes and the product's specifications. Use a multimeter to verify continuity and absence of shorts.

  7. Finalize and Close Enclosure

    Ensure all internal wiring is neatly dressed and secured. If a gasket is used, ensure it is properly seated. Close and securely fasten the enclosure door. Apply any required sealing or locking mechanisms.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.