nVent MCD20166R5 Modular Double Door, with Plate, Rear Panel, 2000x1600x600mm, Gray, Mild Steel
UPC: 783510492427
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Material: Frame: 1.5 mm painted steel. Doors: 2 mm painted steel. Rear, roof and side panels: 1.5 mm painted steel. Mounting plate: 3 mm galvanized steel. Bottom plates: 1 mm galvanized steel.
- Frame: Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660. Including integrated external hole pattern.
- Doors: Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking.
- Rear panel: Fitted by M6 torx screws. Standard facilities for rear doors mounting. Split rear panels in 1600 mm wide enclosures. RD version comes with rear door instead of rear panel.
- Side panels: Supplied as an accessory.
- Roof panel: Removable.
- Lock: Espagnolette 4-point locking system in the main door and 2-point locking system in the secondary door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.
- Bottom plates: Consists of three or four (D>600) pieces.
- Mounting plate: Double folded and slides into position. Adjustable in depth by steps of 25 mm, with the MPD02 accessory. Supplied, attached on the outside of the enclosure packaging.
- Earthing: All panels are earthed through their fittings and equipped with a separate earthing stud.
Specifications
Application | Controls and Drives;Factory Automation and Process Control |
Application | Factory Automation and Process Control; Controls and Drives |
Body Thickness | 16 ga |
Body Thickness | 1.5 mm |
Cable Entry | No |
Color | Light Gray |
Color | Gray |
Color | Grey |
Color Code | RAL 7035 |
Construction | Body: 16 gauge Door: 14 gauge |
Depth | 600 |
Depth | 600 mm |
Depth | 23.62 in |
Door Thickness | 14 ga |
Finish | Powder Coating |
Finish | Powder Coated |
Height | 2,000 mm |
Height | 78.74 in |
Height | 2,000 |
IP Rating | IP55 |
Material | Mild Steel |
Max Mounting Depth | 22 in |
Max Mounting Depth | 11.1 in |
Mounting | Free Standing |
Mounting Plate Height | 1,894;74.57 mm;mm |
Mounting Plate Included | Yes |
Mounting Plate Width | 58.82 in |
Mounting Type | Floor-standing |
Nema Rating | Type 12/Type 13 |
NEMA Rating | 12 |
NEMA Rating | NEMA Type 12 |
Protection Rating | NEMA Type 12 |
Rear Door Included | No |
Rear Panel Included | Yes |
Series | nVent MCD |
Size | 2000x1600x600mm |
Size | 78.74 x 62.99 x 23.62 inch |
Type | Mild Steel Modular Industrial Enclosures |
Weight | 566.17 lb |
Width | 1,600 |
Width | 1,600 mm |
Width | 62.99 in |
Package Dimensions (L x W x H) | 63.37 IN x 24.25 IN x 79.12 IN |
Package Dimensions (L x W x H) | 160.9598 cm x 61.595 cm x 200.9648 cm |
Package Weight (Imperial) | 566.170 L |
Package Weight (Metric) | 256.815 kg |
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What are the dimensions of the MCD20166R5 enclosure?
The enclosure has dimensions of 2000mm height, 1600mm width, and 600mm depth.
What is the protection degree of this enclosure?
The enclosure has an IP55 protection degree, complying with TYPE 12 and IK 10 standards.
What materials are used in the construction of the MCD20166R5?
The frame, doors, rear, roof, and side panels are made of painted steel, while the mounting and bottom plates are galvanized steel.
What is the thickness of the enclosure's body and doors?
The body thickness is 16 gauge, and the door thickness is 14 gauge.
Does the MCD20166R5 enclosure come with a mounting plate?
Yes, a mounting plate is included with the enclosure.
What are the dimensions of the included mounting plate?
The mounting plate has a height of 74.57mm and a width of 58.82 inches.
What is the maximum mounting depth for this enclosure?
The maximum mounting depth is 22 inches.
Does the enclosure include a rear door?
No, the MCD20166R5 comes with a rear panel, not a rear door.
What type of locking system does the enclosure use?
It features an Espagnolette 4-point locking system on the main door and a 2-point system on the secondary door, with a standard double-bit lock.
How are the panels of the enclosure earthed?
All panels are earthed through their fittings and equipped with a separate earthing stud.
How to Install the MCD20166R5 Controller
This guide provides step-by-step instructions for installing and configuring the MCD20166R5 controller, ensuring proper mounting, wiring, and initial setup.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Mount the controller
Secure the MCD20166R5 controller to the designated mounting surface using the provided mounting screws. Ensure that the controller is level and firmly attached.
- Connect the wiring
Use wire strippers to prepare the ends of the wires. Connect the power and signal wires to the appropriate terminals on the controller, ensuring that all connections are secure and properly insulated.
- Power on and configure
Turn on the power supply to the controller. Use a multimeter to verify that the voltage levels are correct. Follow the manufacturer's instructions to configure the controller settings as required for your application.
- Calibrate the controller
Perform any necessary calibration procedures as outlined in the user manual. This may include setting parameters for operation and testing the controller to ensure it functions correctly.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.