nVent MCD20126R5 Modular Double Door, with Plate, Rear Panel, 2000x1200x600mm, Gray, Mild Steel
UPC: 783510491949
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Material: Frame: 1.5 mm painted steel. Doors: 2 mm painted steel. Rear, roof and side panels: 1.5 mm painted steel. Mounting plate: 3 mm galvanized steel. Bottom plates: 1 mm galvanized steel.
- Frame: Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660. Including integrated external hole pattern.
- Doors: Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking.
- Rear panel: Fitted by M6 torx screws. Standard facilities for rear doors mounting. Split rear panels in 1600 mm wide enclosures. RD version comes with rear door instead of rear panel.
- Side panels: Supplied as an accessory.
- Roof panel: Removable.
- Lock: Espagnolette 4-point locking system in the main door and 2-point locking system in the secondary door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.
- Bottom plates: Consists of three or four (D>600) pieces.
- Mounting plate: Double folded and slides into position. Adjustable in depth by steps of 25 mm, with the MPD02 accessory. Supplied, attached on the outside of the enclosure packaging.
- Earthing: All panels are earthed through their fittings and equipped with a separate earthing stud.
Specifications
Application | Controls and Drives;Factory Automation and Process Control |
Application | Factory Automation and Process Control; Controls and Drives |
Body Thickness | 16 ga |
Body Thickness | 1.5 mm |
Cable Entry | No |
Color | Gray |
Color | Grey |
Color | Light Gray |
Color Code | RAL 7035 |
Construction | Body: 16 gauge Door: 14 gauge |
Depth | 600 |
Depth | 600 mm |
Depth | 23.62 in |
Door Thickness | 14 ga |
Finish | Powder Coating |
Finish | Powder Coated |
Height | 2,000 |
Height | 78.74 in |
Height | 2,000 mm |
IP Rating | IP55 |
Material | Mild Steel |
Max Mounting Depth | 11.1 in |
Max Mounting Depth | 22 in |
Mounting | Free Standing |
Mounting Plate Height | 1,894;74.57 mm;mm |
Mounting Plate Included | Yes |
Mounting Plate Width | 43.07 in |
Mounting Type | Floor-standing |
NEMA Rating | 12 |
NEMA Rating | NEMA Type 12 |
Nema Rating | Type 12/Type 13 |
Protection Rating | NEMA Type 12 |
Rear Door Included | No |
Rear Panel Included | Yes |
Series | nVent MCD |
Size | 2000x1200x600mm |
Size | 78.74 x 47.24 x 23.62 inch |
Type | Mild Steel Modular Industrial Enclosures |
Weight | 433.53 lb |
Width | 1,200 |
Width | 1,200 mm |
Width | 47.24 in |
Package Dimensions (L x W x H) | 47.62 IN x 24.25 IN x 79.12 IN |
Package Dimensions (L x W x H) | 120.9548 cm x 61.595 cm x 200.9648 cm |
Package Weight (Imperial) | 433.530 L |
Package Weight (Metric) | 196.649 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What is the protection degree of the MCD20126R5 enclosure?
The enclosure has an IP55 protection degree, making it well-suited for many applications.
What industry standards does the MCD20126R5 enclosure comply with?
It is UL 508A Listed Type 12, cUL Listed Type 12, NEMA/EEMAC Type 12, CSA Type 12, and IEC 62208 IP55.
What materials are used in the construction of the MCD20126R5 enclosure?
The frame, doors, rear, roof, and side panels are painted steel. The mounting plate is galvanized steel, and bottom plates are galvanized steel.
What are the dimensions of the MCD20126R5 enclosure?
The enclosure measures 78.74 inches in height, 47.24 inches in width, and 23.62 inches in depth.
Is a mounting plate included with the MCD20126R5 enclosure?
Yes, a mounting plate is included. It is 74.57mm in height and 43.07 inches in width.
What is the finish and color of the MCD20126R5 enclosure?
The enclosure has a RAL 7035 structured powder coating in a light gray color.
What is the body and door thickness of the MCD20126R5 enclosure?
The body thickness is 16ga, and the door thickness is 14ga.
What type of locking system does the MCD20126R5 enclosure use?
It features an Espagnolette 4-point locking system on the main door and a 2-point system on the secondary door, with a standard double-bit lock.
Are side panels included with the MCD20126R5 enclosure?
No, side panels are supplied as an accessory and must be ordered separately to maintain the protection rating for individual or assembled cabinets.
How are the panels of the MCD20126R5 enclosure earthed?
All panels are earthed through their fittings and are equipped with a separate earthing stud.
How to Install the MCD20126R5 Controller
This guide provides step-by-step instructions for installing and configuring the MCD20126R5 Controller, ensuring proper mounting, wiring, and initial setup.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Mount the controller
Secure the MCD20126R5 controller to the designated mounting surface using the provided mounting screws. Ensure that the controller is level and firmly attached.
- Connect the power supply
Using wire strippers, prepare the power supply wires and connect them to the designated terminals on the controller. Ensure that the connections are secure and insulated to prevent short circuits.
- Configure initial settings
Power on the controller and use the interface to navigate to the configuration menu. Set the required parameters according to your application needs, and save the settings.
- Calibrate the controller
Follow the calibration procedure outlined in the user manual to ensure accurate performance. Use a multimeter to verify output signals during calibration.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.