nVent MCD18125R5 Modular Double Door, with Plate, Rear Panel, 1800x1200x500mm, Gray, Mild Steel
UPC: 783510490737
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Material: Frame: 1.5 mm painted steel. Doors: 2 mm painted steel. Rear, roof and side panels: 1.5 mm painted steel. Mounting plate: 3 mm galvanized steel. Bottom plates: 1 mm galvanized steel.
- Frame: Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660. Including integrated external hole pattern.
- Doors: Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking.
- Rear panel: Fitted by M6 torx screws. Standard facilities for rear doors mounting. Split rear panels in 1600 mm wide enclosures. RD version comes with rear door instead of rear panel.
- Side panels: Supplied as an accessory.
- Roof panel: Removable.
- Lock: Espagnolette 4-point locking system in the main door and 2-point locking system in the secondary door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.
- Bottom plates: Consists of three or four (D>600) pieces.
- Mounting plate: Double folded and slides into position. Adjustable in depth by steps of 25 mm, with the MPD02 accessory. Supplied, attached on the outside of the enclosure packaging.
- Earthing: All panels are earthed through their fittings and equipped with a separate earthing stud.
Specifications
Application | Controls and Drives;Factory Automation and Process Control |
Body Thickness | 16 ga |
Body Thickness | 1.5 mm |
Cable Entry | No |
Color | Light Gray |
Color | Gray |
Color | Grey |
Color Code | RAL 7035 |
Construction | Body: 16 gauge Door: 14 gauge |
Depth | 500 |
Depth | 19.69 in |
Depth | 500 mm |
Door Thickness | 14 ga |
Finish | Powder Coating |
Finish | Powder Coated |
Height | 70.87 in |
Height | 1,800 mm |
Height | 1,800 |
IP Rating | IP55 |
Material | Mild Steel |
Max Mounting Depth | 11.1 in |
Max Mounting Depth | 18.07 in |
Mounting | Free Standing |
Mounting Plate Height | 1,694;66.7 mm;mm |
Mounting Plate Included | Yes |
Mounting Plate Width | 43.07 in |
Mounting Type | Floor-Stand |
Mounting Type | Floor-standing |
NEMA Rating | 12 |
NEMA Rating | NEMA Type 12 |
Protection Rating | NEMA Type 12 |
Rear Door Included | No |
Rear Panel Included | Yes |
Series | MCD |
Size | 1800x1200x500mm |
Size | 70.87 x 47.24 x 19.69 inch |
Type | Mild Steel Modular Industrial Enclosures |
Weight | 390.36 lb |
Width | 47.24 in |
Width | 1,200 mm |
Width | 1,200 |
Package Dimensions (L x W x H) | 47.62 IN x 20.31 IN x 71.24 IN |
Package Dimensions (L x W x H) | 120.9548 cm x 51.5874 cm x 180.9496 cm |
Package Weight (Imperial) | 390.360 L |
Package Weight (Metric) | 177.067 kg |
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
Frequently Asked Questions
What are the dimensions of the MCD18125R5 enclosure?
The enclosure has a height of 70.87 inches, a width of 47.24 inches, and a depth of 19.69 inches.
What material is the MCD18125R5 enclosure made of?
The enclosure is constructed from mild steel, with painted steel for the frame, doors, rear, roof, and side panels, and galvanized steel for the mounting and bottom plates.
What is the protection degree of the MCD18125R5 enclosure?
The enclosure complies with IP55, Type 12, and IK 10 protection ratings.
Does the MCD18125R5 enclosure include a mounting plate?
Yes, a mounting plate is included with the enclosure. It is 3 mm thick galvanized steel.
What are the dimensions of the included mounting plate?
The included mounting plate has a height of 66.7 mm and a width of 43.07 inches.
Can the doors of the MCD18125R5 enclosure be reversed?
No, the doors of this enclosure cannot be reversed. Separate doors must be ordered for left-hand door locking.
What type of locking system does the MCD18125R5 enclosure use?
It features an Espagnolette 4-point locking system on the main door and a 2-point system on the secondary door, with a standard double-bit lock.
Are side panels included with the MCD18125R5 enclosure?
No, side panels are supplied as an accessory and must be ordered separately to maintain the protection rating for stand-alone installations.
What are the industry standards the MCD18125R5 enclosure complies with?
It is UL 508A Listed (Type 12), cUL Listed (Type 12), NEMA/EEMAC Type 12, CSA certified (Type 12), and complies with IEC 62208.
What is the body and door thickness of the MCD18125R5 enclosure?
The body thickness is 16 gauge, and the door thickness is 14 gauge.
How to Install the MCD18125R5 Controller
This guide provides step-by-step instructions for installing and configuring the MCD18125R5 Controller, ensuring proper setup and operation.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Wire connectors, Terminal blocks
- Mount the controller
Secure the MCD18125R5 controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the power supply
Connect the power supply wires to the appropriate terminals on the controller. Ensure that the connections are tight and insulated to prevent short circuits.
- Wire the input/output connections
Connect the input and output devices to the corresponding terminals on the controller. Use wire connectors to secure the connections and verify that they are correctly wired according to the wiring diagram.
- Configure the controller settings
Power on the controller and access the configuration menu. Set the desired parameters for operation, including speed, torque, and any other relevant settings.
- Calibrate the controller
Perform a calibration procedure as per the manufacturer's guidelines to ensure accurate operation. This may involve running the controller through a series of tests to confirm its performance.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.