Authorized nVent Distributor
nVent HIBMXEU25CWCL - Hazloc Cable Glands for Non Armored Cable, Non-Metallic (Ex e/tb), M25x1.5

nVent HIBMXEU25CWCL Hazloc Cable Glands for Non Armored Cable, Non-Metallic (Ex e/tb), M25x1.5

UPC: 783510306984

Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent HIBMXEU25CWCL is a non-metallic cable gland designed for secure cable entry, strain relief, and environmental sealing in hazardous locations. Certified for ATEX and IECEx, it meets the requirements for Zone 1, Zone 2, Zone 21, and Zone 22 environments, protecting personnel and equipment in explosive gas and dust atmospheres. Constructed from polyamide 6 with a chloroprene seal, the gland operates reliably from -40°C to 70°C, ensuring performance in extreme temperatures. The M25x1.5 metric thread ensures compatibility with a wide range of industrial enclosures and electrical equipment, providing a secure fit for various applications. Each kit includes a chloroprene washer and locknut, delivering a complete sealing solution with IP66/68 ingress protection and impact resistance up to 7 Joules, making it suitable for harsh and demanding environments. The gland is ideal for oil and gas, chemical processing, mining, and manufacturing applications where non-metallic construction is preferred for corrosion resistance and electrical insulation. Its design also ensures resistance to UV, ozone, and a wide range of chemicals, further enhancing its durability and reliability in challenging conditions.
  • Suitable for non-armored cables in increased safety (ex e) and dust (ex tb) applications
  • Provide high level of protection and reliability in extreme environments with impact resistance of up to 7 Joules
  • All metric thread cable glands are packaged as kits
  • Each kit includes a chloroprene washer, a locknut and an earthtag
  • Includes chloroprene seal
  • Available in Metric (M) and NPT (N) thread type
  • Operating temperature from -40 C to 70 C with chloroprene seal

Specifications

Application
Hazardous Environments
Clamping Range
0.47-0.67 in
Clamping Range Diameter
12.0-17.0 mm
Clamping Range Diameter
0.47-0.67 in
Color
Dark Gray
Color
Gray
Finish
Smooth Matte
IP Rating
IP66/68 (EN60529)
Material
Non-Metallic
Material
Polyamide 6
Min H
2,600 mm
Min H
27 mm
Seal
Chloroprene
Series
HIBMXEU
Size
M25x1.5
Type
Other Accessories
Weight
0.1 lb
Works With
NEMA / IEC
Package Dimensions (L x W x H)
6 IN x 6 IN x 1 IN
Package Dimensions (L x W x H)
15.24 cm x 15.24 cm x 2.54 cm
Package Weight (Imperial)
0.100 L
Package Weight (Metric)
0.045 kg
Hazloc Cable Glands for Non Armored Cable, Non-Metallic (Ex e/tb), NPT3/4"

HIBNX3C

Hazloc Cable Glands for Non Armored Cable, Non-Metallic (Ex e/tb), NPT3/4"
Sealing plug for cover screw ? Grey

DP 14553

Sealing plug for cover screw ? Grey
cordgrip - black nylon. Mounting hole diameter 1.115"

1427CG21

cordgrip - black nylon. Mounting hole diameter 1.115"
Non-metallic Nylon Clamp, 3/16 Inch, White. Screw Hole Size .203 for #10 Screw. Temperature Range -40 Degrees F to 176 Degrees F. 100 per Box

12-103

Non-metallic Nylon Clamp, 3/16 Inch, White. Screw Hole Size .203 for #10 Screw. Temperature Range -40 Degrees F to 176 Degrees F. 100 per Box
6x6x3 Polycarbonate Enclosure NEMA 6P | Standard Hinge | Clear Lid | Integrated Locking Latch | Intergrated Mounting Flange

P6063C

6x6x3 Polycarbonate Enclosure NEMA 6P | Standard Hinge | Clear Lid | Integrated Locking Latch | Intergrated Mounting Flange
The NEMA 3R enclosures feature a standard padlock-able handle feature. They are galvanised steel coated with Pulvalar 115 powder

AB763

The NEMA 3R enclosures feature a standard padlock-able handle feature. They are galvanised steel coated with Pulvalar 115 powder
TOUCH-UP PAINT BRUSH COLOR RAL7035 FOR CADRYS DELTA

51900000

TOUCH-UP PAINT BRUSH COLOR RAL7035 FOR CADRYS DELTA
Box Support, Steel, Electro Galvanized 2 in. size, 2-1/2 in. length 100 per pack

SBL300

Box Support, Steel, Electro Galvanized 2 in. size, 2-1/2 in. length 100 per pack
A retrofit cable connector for nonmetallic sheathed cable and NM-B nonmetallic cable. It is made of plastic and comes in grey. The size is 3/4" and it is designed for 1-cable use.

RCR75J

A retrofit cable connector for nonmetallic sheathed cable and NM-B nonmetallic cable. It is made of plastic and comes in grey. The size is 3/4" and it is designed for 1-cable use.

How to Install the HIBMXEU25CWCL Controller

This guide provides step-by-step instructions for installing and configuring the HIBMXEU25CWCL controller, ensuring proper wiring and setup for optimal performance.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors

  1. Mount the controller

    Secure the HIBMXEU25CWCL controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.

  2. Connect the wiring

    Lead the appropriate cables through the cable glands and connect them to the terminal connectors on the controller. Ensure all connections are tight and secure to prevent any electrical faults.

  3. Configure the controller

    Power on the controller and use the multimeter to verify that all connections are functioning correctly. Follow the manufacturer's programming instructions to set up the desired parameters for operation.

  4. Calibrate the system

    Perform a calibration of the controller according to the specifications provided in the manual. Adjust settings as necessary to ensure accurate performance.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.