Contact for Pricing
Overview
- 8000 BTU cooling capacity for effective thermal management of industrial enclosures.
- Top-mount design for easy installation on enclosure exteriors.
- Durable low-carbon steel construction with minimal visible fasteners for rugged environments.
- Includes a cleanable, reusable aluminum mesh filter to protect cooling coils.
- 115V, 1 Phase power requirement for broad industrial compatibility.
- Every unit functionally tested before shipping
- Mounting hardware, gaskets and user manual furnished with the unit
- Every unit functionally tested before shipping
Specifications
Application | Controls and Drives; Corrosive Environments; Power Distribution |
Color | Gray |
Material | Steel |
Mounting Type | Top-Mount |
Series | Genesis |
Size | HB16 |
Type | Air Conditioners |
Voltage Rating | 115V |
Package Dimensions (L x W x H) | 28 IN x 20 IN x 16 IN |
Package Dimensions (L x W x H) | 71.12 cm x 50.8 cm x 40.64 cm |
Package Weight (Imperial) | 142.330 L |
Package Weight (Metric) | 64.561 kg |
How to Install the nVent HIBOY® HB16 Air Conditioner
This guide provides instructions for unpacking, handling, and installing the nVent HIBOY® HB16 air conditioner either inside or on top of an enclosure. It covers critical pre-installation checks and proper drainage setup.
Estimated time: 45m
Tools needed:
Wrench, Ratchet driver, Wire strippers
Supplies needed:
Mounting bolts/screws, Adhesive-backed gasket tape (provided), Drain tube (provided), Copper P-trap (provided), Pressure relief fitting (provided)
- Unpack and Inspect the Air Conditioner
Carefully unpack the HIBOY® air conditioner and inspect it for any shipping damage such as dents, scratches, or loose assemblies. Note any damage on the freight bill and report it to the delivering carrier within 15 days of delivery.
- Position the Air Conditioner Upright
After uncartoning, place the air conditioner in its normal upright mounting position for a minimum of five minutes. This allows the compressor oil to drain to the compressor sump area, preventing permanent damage and voiding the warranty. Do not attempt to operate the air conditioner while it is horizontal or on its side, back, or front.
- Review Nameplate and Enclosure Requirements
Refer to the nameplate on your unit to identify electrical power characteristics, capacity, and operating temperatures. Ensure the enclosure design can support the air conditioner's weight and has the correct cutout dimensions for air "IN" and "OUT" openings, as detailed in the dimensional drawings.
- Mount the Air Conditioner to the Enclosure
If mounting inside the enclosure, ensure slide rails are provided to support the rear portion of the air conditioner. Apply the provided adhesive-backed gasket tape around the enclosure's cutout openings for a sealed, closed-loop design. Carefully position the air conditioner and start mounting bolts by hand to avoid cross-threading, then tighten them with a wrench or ratchet driver.
- Install the Condensate Drain System
Route the provided .5 inch (13 mm) inside diameter drain tube from the side of the air conditioner to the exterior of the enclosure. Install the included copper "P" trap and pressure relief fitting, ensuring the P-trap is properly primed. Verify that the drain outlet is not submerged and no part of the drain system is elevated above the air conditioner's exit point to prevent overflowing of the condensate pan.
- Connect Electrical Power
Connect the air conditioner's power cord to a properly grounded electrical outlet. Refer to the unit's nameplate for correct electrical current requirements. Ensure the minimum circuit ampacity is at least 125% of the amperage shown in the DESIGN DATA table and avoid using extension cords. Do not attempt to restart the air conditioner for at least one minute after it has been shut off, either accidentally or intentionally.
- Perform Initial Functional Test
With the unit in its upright operating position for at least five minutes, connect power and operate the air conditioner for five to ten minutes. Verify that the condenser blower, evaporator blower, and compressor are running without excessive noise or vibration. Check for cool air output between 50°F (10°C) and 60°F (16°C) if the room temperature is between 70°F (21°C) and 80°F (27°C).
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.