nVent G520816G051 SpectraCool Indoor G52, 8000BTU 115V, Brushed, SS304
UPC: 783510198978
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Attractive industrial design with minimal use of visible fasteners
- Advanced Corrosion Protection Level 1 (ACP L1) Protection Includes: Protective coatings only applied to copper tubing and coils on the condenser (exterior facing) side as well as thermostat coatings
- Energy-efficient rotary compressor on most models
- Advanced Corrosion Protection Level 2 (ACP L2) Protection Includes: Everything that was coated in ACP L1, plus protective coatings applied to the evaporator (interior facing ) side and an additional wrap around the thermostat
- Cleanable, reusable aluminum mesh filter included to protect coils for maximum cooling performance in dirty environments
- Reliable mechanical thermostat on enclosure side of the unit
- All G-series come standard with two separate thermostats for cooling and heating when a heater is equipped
- Operating temperature range from -40 F/-40 C to 131 F/55 C
- Dust-resistant condenser coil allows the unit to be run filterless in most indoor applications
- Dual condenser-side air movers for performance redundancy on G52 and G57 models
Specifications
Ambient Temperature | 40 Deg C |
Ambient Temperature | 50-131 °F |
Amperage Rating | 11.4;9.9 A;A |
Amperage Rating | 9.9/11.4 A |
Application | Power Distribution; Controls and Drives; Corrosive Environments |
Application | Controls and Drives;Corrosive Environments;Power Distribution |
Btu Rating | 8,000 |
Color | Unpainted |
Corrosion Resistant | No |
Depth | 296 mm |
Depth | 11.66 in |
Finish | Brushed #3 |
Frequency Rating | 50/60 Hz |
Frequency Rating, Maximum | 60 Hz |
Frequency Rating, Minimum | 50 Hz |
Height | 52.69 in |
Height | 1,338 mm |
Material | Stainless Steel 304 |
Max Current | 11.4 A |
Mounting | Side wall |
NEMA Rating | 4X Watertight, corrosion-resistant |
Nominal Capacity Btu/h | 8,000 Btu/h |
Nominal Capacity Watts | 2,300 W |
Nominal Voltage | 115 V |
Number Of Phases | 1 |
Operating Temperature | 10-55 |
Operating Temperature | 10-55 °C |
Operating Temperature | 50-131 °F |
Outdoor Installation | No |
Phase | 1 |
Phase | 1 Ph |
Power | 1111/1332 W |
Product Family | SpectraCool |
Protection Rating | NEMA Type 4X |
Refrigerant | R513A |
Remote Access Control | No |
Thickness | 20 ga |
Thickness | 51.40mm (2.024") |
Type | Air Conditioners |
Voltage AC | 100-120 V |
Voltage Rating | 115 V |
Weight | 58.1 kg |
Weight | 150 lb |
Width | 435 mm |
Width | 17.12 in |
Package Dimensions (L x W x H) | 19 IN x 16 IN x 55 IN |
Package Dimensions (L x W x H) | 48.26 cm x 40.64 cm x 139.7 cm |
Package Weight (Imperial) | 150.000 L |
Package Weight (Metric) | 68.040 kg |
Frequently Asked Questions
What is the cooling capacity of the G520816G051?
The G520816G051 is an 8000 BTU/h (2300 W) indoor air conditioner.
What voltage does the unit require?
The device operates on 115V AC, 50/60Hz, single-phase power.
Is the SpectraCool G520816G051 suitable for outdoor use?
No, this is an indoor model designed for Type 4X sealed enclosures.
What materials is the housing made from?
The housing is constructed from brushed Stainless Steel 304 (SS304).
Does the unit require filter maintenance?
No, the filterless design eliminates the need for regular filter replacements.
What enclosure rating does this unit have?
The unit is rated Type 4X for watertight and corrosion-resistant performance.
How to Install the G520816G051 Air Conditioner
This guide provides step-by-step instructions for installing and configuring the G520816G051 air conditioner, ensuring proper functionality and safety.
Estimated time: 45m
Tools needed:
Screwdriver, Wrench, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Mounting gasket, Terminal connectors
- Inspect the air conditioner
Check the air conditioner for any visible damage and ensure it is functioning correctly before installation.
- Install mounting gaskets
Using the provided gasket kit, attach the gaskets to the air conditioner to ensure a watertight seal.
- Mount the air conditioner
Securely mount the air conditioner to the enclosure, ensuring not to damage the gaskets. Avoid dragging the unit to prevent tearing the gaskets.
- Wire the power supply
Refer to the nameplate for electrical requirements and connect the unit to a properly grounded power supply using copper conductors.
- Connect the thermostat
If required, wire the remote thermostat outputs to the appropriate terminals on the 24 VAC terminal strip according to the wiring diagram.
- Set the thermostat
Adjust the thermostat to the desired cabinet temperature, following the guidelines in the Sequence of Operation section.
- Test the air conditioner
Allow the unit to remain upright for at least five minutes before powering on. Verify that the evaporator fan starts and the compressor operates correctly.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.